583895
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Custom User Defined Programs
There are two customizable User programs that allow you to build and save your own workout. The
two programs, User 1 and User 2, operate exactly the same way so there is no reason to describe
them separately. You can build your own custom program by following the instructions below or you
can save any other preset program you complete as a custom program. Both programs allow you to
further personalize it by adding your name.
1. Press the User 1 or User 2 key. The Message Center will show a welcome message. If you had previously saved a program
the message will contain your name. Then press the Enter key to begin programming.
2. When you press Enter, the Message Center will show “Name - A”, if there is no name saved. If the name “David” had been
previously saved the Message Center will show “Name - David” and the D will be blinking. If there is a name saved you can
change it or you may press the Stop key to keep the name and continue to the next step. If you want to enter a name use
the Up/Down key to change the rst letter then press Enter to save the rst letter and continue to the next letter. When
you have nished entering the name press the Stop key to save the name and continue to the next step.
3. The Message Center will ask you to enter your Age. You may enter your age, using the Level Up/Down keys, then press the
Enter key to accept the new value and proceed on to the next screen.
4. You are now asked to enter your Weight. You may adjust the weight value using the Up/Down keys or the numeric key pad,
then press Enter to continue.
5. Next is Time. You may adjust the time and press Enter to continue.
6. Now you are asked to adjust the Max Resistance Level of the program, press Enter when resistance has been selected.
7. Now the rst column will be blinking and you are asked to adjust the resistance level for the rst segment(SEGMENT > 1)
of the workout by using the Level Up key. When you nish adjusting the rst segment, or if you don’t want to change, then
press Enter to continue to the next segment.
8. The next segment will show the same workload resistance level as the previously adjusted segment. Repeat the same process
as the last segment then press Enter. Continue this process until all twenty segments have been set.
9. The Message Center will then tell you to press Enter to save the program. After saving the program the Message Center says
“New program saved” then will give you the option to start or modify the program. Pressing Stop will exit to the start
up screen.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE895 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE895 in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info