583896
8
Zoom out
Zoom in
Previous page
1/40
Next page
8
82
81
82
81
82
81
45
55
92
80
99
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
55 SCREW
M5X10M/M
4
92 BOLT
5/16”X1-3/4”
2
99 NUT
5/16”
2
1. Gather HARDWARE FOR STEP 1.
2. Tilt the elliptical trainer to one side (you may want
to place a piece of Styrofoam or a block under the
unit for support). Install the 3 LEVELERS (81)
to the underside of the unit. Repeat this lever
assembly on opposite side of the unit.
3. Press the 6 END CAPS (82) into the oval
stabilizer tubes.
4. Attach the TRANSPORT WHEELS (80) to each
bracket with 2 BOLTS (92) and 2 NUTS (99).
Partially tighten with the 13/14mm WRENCH
and 5mm L WRENCH. Over tightening the
hardware will prevent the wheels from rotating.
5. Attach the ROLLER WHEEL COVERS (45)
with 4 SCREWS (55). Tighten with the screw
driver..
NOTE: When assembly is complete, the transport
wheels can be engaged by lifting the rear of the
elliptical trainer.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE795 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE795 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info