584179

Spirit XE500 2007 Manual

14
Zoom out
Zoom in
Previous page
1/29
Next page
XE500 Elliptical
13
STEP 4: Plastic Parts Assembly
1. Match Connecting Arm Covers (72- inner covers) and (71-outer covers). Install the inner
covers (72-1 left and 72 right) onto the Left and Right Connecting Arms (8&9) and
secure with two M5x15mm Phillips Head Screws (82) and two 3.5x12mm Self Tapping
Screws (107) by using the Short Phillips Head Screw Driver (125). Install the outer
covers (71-1 left and 71 right) onto the left and right handlebars (10&11) and secure
with two M5x15mm Phillips Head Screws (82) and two 3.5x12mm Self Tapping Screws
(107).
2. Install Sliding Wheel Covers (64) on each side and secure with four M5x15mm Phillips
Head Screws (82).
3. Install the two Stabilizer Covers (60) and (61) on the middle stabilizer bar with
M5x15mm Phillips Head Screws (82).
4. Install the Front Stabilizer Cover (59) on the front stabilizer with two M5x15mm Phillips
Head Screws (82).
5. Install the front (120-1) and rear (120) console mast covers with three M5 x 15m/m
Screws (82) and two 3.5x12m/m Self Tapping Screws (107).
6. Install the two incline Cover brackets (156), with the hole for mounting the plastic cover
on the bent tab facing rearward, and secure them on the Incline Rail Assembly (2) with
four M6x10mm Phillips Head Screws (157). Install the Rear incline bar cover (73-2) on
the rail base with two M5 x 15m/m Screws (82).
7. Install the Rear Stabilizer Cover (73-3) on the Rear Stabilizer and the Cover brackets
(156) with four M5x15mm Phillips Head Screws (82).
8. This step to be performed after the elliptical power is plugged in. Run the incline to
position 8 and install the incline Rail front cover (73) up against the middle stabilizer
tube with four M5x15mm Phillips Head Screws (82).
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE500 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE500 2007 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info