583962
14
Zoom out
Zoom in
Previous page
1/32
Next page
10
Elliptical T
rainer
XE395
1. Mate the Connecting Arm Covers (71 and 72) over the Left Connecting Arm (8) and secure with two Phillips
Head Screws (82) and a Sheet Metal Screw (107). Tighten the screws using the Short Phillips Head Screw
Driver (125). Repeat for the opposite side.
2. Install Roller Covers (64) onto each set of Rollers. Secure with four Phillips Head Screws (82). Tighten using the
Phillips Head Screw Driver (126).
3. Attach the two covers (L-60) & (R-61) to the middle stabilizer tube (there is a sticker on the bottom side
identifying each). Secure with a Phillips Head Screw (82) on each side. Secure with the Phillips Head Screw
Driver (126).
4. Attach the Front Stabilizer Cover (59) to the front stabilizer tube with Use two Phillips Head Screws (82).
Secure with the Phillips Head Screw Driver (126).
5. Attach a steel bracket (156) to the rear stabilizer tube on the left and right sides (with the single hole facing the
rear), and secure them with four Phillips Head Screws (157). Secure using the Phillips Head Screw Driver (126).
6. Attach the front Rear Stabilizer Cover to the rear stabilizer tube with two Phillips Head Screws(82). Secure with
the Phillips Head Screw Driver (126). Attach the back Rear Stabilizer Cover (73-3) onto the rear stabilizer tube
with four Phillips Head Screws (82). Secure using the Phillips Head Screw Driver (126).
7. Plug in the electrical cord to a properly grounded outlet and turn on the power button, located at the bottom
front of the unit. Raise the incline to Level “8” and attach the Incline Cover (73) with two Phillips Head Screws
(82). Secure using the Phillips Head Screw Driver (126). Return the Incline to “0”.
8. Look closely at the four oor levelers underneath the middle and rear of the elliptical. If any of these aren’t in
contact with the oor, use the wrench (124) to loosen the bottom nut. Once the nut has been loosened, turn
the rubber pad clockwise until it makes solid contact with the oor. Retighten the bottom nut to prevent it from
moving.
HARDWARE
STEP 4: Plastic Parts
#107. 3.5 x 12mm
Sheet Metal Screw
(2 pcs)
#82. M5 x15mm
Phillips Head Screw
(20 pcs)
#157. M6 x10mm
Phillips Head Screw
(4 pcs)
#156. Bracket
(2 pcs)
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE395 2011-2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE395 2011-2012 in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info