583962
10
Zoom out
Zoom in
Previous page
1/32
Next page
6
Elliptical T
rainer
XE395
1. Slide the Incline Rail Assembly (2) into the U channel of the Main Frame (1). Be very careful not to damage the
wires that exit each part.
2. Connect the Incline Rail Assembly (2) horizontally to the U channel of the Main Frame (1) with two Hex
Head Bolts (77), two Flat Washers (96), and two Nyloc Nuts (89). Secure it vertically with four Hex Head
Bolts (167), four split washers (178), four Flat Washers (100), and four star washers (179). Tighten using the
wrenches provided (124 & 129).
3. Connect the Incline Motor wires (37 & 38) to the wiring harness & black wire that exits the Incline Rail
Assembly (2). Push the excess cable inside the U channel.
4. Guide the twist tie that is attached to the Computer Cables (36 & 39) bundle through the Console Mast
Cover (49) and the bottom of the Console Mast (12) until it exits the top of the steel tube Note: make sure the
console mast cover is positioned like the illustration. Secure the Console Mast (12) by loosely threading two Hex
Head Bolts (76) from the front and two Curved Washers (104) rst. Then secure the mast from the side by
loosely threading a Hex Head Bolt (75) and a Split Washer (128); Note: there is one bolt already installed in the
receiving bracket that will engage with the slot at the bottom of the Console Mast. Tighten the bolt from the left side
last.
5. Tighten the two front bolts rst, then the side bolts with the wrench (124). Secure the Console Mast Cover
(49) over the top of the plastic side covers (50 & 51).
6. Untie the twist tie, which is attached to the Computer Cables (36 & 39). Plug in the connectors of the two
Hand pulse cables (44), Computer cable (36 & 39), Resistance cable (146), and Incline cable (146-1) in the
bottom of the Console (32). Secure the Console (32) onto the mounting plate with four Phillips Head Screws
(85). Tighten them with the Phillips Head Screw Driver (126).
HARDWARE
STEP 1: Incline Rail & Console Mast
#96. 3/8” x 19 x 1.5T
Flat Washer
(2 pcs)
#100. 5/16” x 20 x 1.5T
Flat Washer
(4 pcs)
#104. 3/8” x 23 x 1.5T
Curved Washer
(2 pcs)
#128. 3/8” x 2T
Split Washer
(1 pc)
#85. M5 x 10mm
Phillips Head Screw
(4 pcs)
#89. 3/8” x 7T
Nyloc Nut
(2 pcs)
#178. 5/16” x 1.5T
Split Washer
(4 pcs)
#179. 5/16”
Star Washer
(4 pcs)
#76. 3/8” x 3/4”
Hex Head Bolt
(2 pcs)
#77. 3/8” x 1-1/2”
Hex Head Bolt
(2 pcs)
#167. 5/16” x 2-1/4”
Hex Head Bolt
(4 pcs)
#75. 3/8” x 2-1/4”
Hex Head Bolt
(1 pc)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE395 2011-2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE395 2011-2012 in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info