583961
12
Zoom out
Zoom in
Previous page
1/30
Next page
8
Elliptical T
rainer
XE295
1. Mate the Connecting Arm Covers (R) (58) with the Connecting Arm Covers (L) (58-1) on left and right
Connecting Arms (8 & 9). Make sure these covers are oriented the correct way. There is an arrow ^ mark on
the inside. Fasten together with four Phillips Head Screws (105) and four Sheet Metal Screws (87). Tighten with
the Short Phillips Head Screw Driver (107). Then mate the Connecting Arm Covers (R) (57) with (L) (57-1)
on Swing Arm (L) (10) and Swing Arm (R) (11), respectively. Fasten together with four Phillips Head Screws
(105) and four Sheet Metal Screws (87). Tighten with the Short Phillips Head Screw Driver (107).
2. Fasten the two Wheel Covers (52) to the roller sets with four Phillips Head Screws (105). Tighten with the
Phillips Head Screw Driver(108).
3. Attach the left side cover (19) and right side cover (20) to the mid-stabilizer tube with two Phillips Head
Screws (105). Attach the right side cover (20) and left side cover (19) to the rear stabilizer tube with two
Phillips Head Screws (105). Tighten all four screws with the Phillips Head Screw Driver (108). Then attach the
Front Stabilizer Cover (49) with two Phillips Head Screws (105). Tighten with the Phillips Head Screw Driver
(108).
4. Install the Front Handle Bar Covers (L & R) (54 & 55) and Rear Handle Bar Covers (L & R) (54-1 & 55-1)
over the Handle Bars axle connections with four Sheet Metal Screws (87) on each side. Tighten with the Phillips
Head Screw Driver (108).
5. Look closely at the four oor levelers underneath the middle and rear of the elliptical. If any of these aren’t
in contact with the oor, use the wrench (124) to loosen the bottom nut. Once the nut has been loosened,
turn the rubber pad clockwise until it makes solid contact with the oor. Retighten the bottom nut to prevent it
from moving.
HARDWARE
STEP 4: Plastic Parts
#87. 3.5 x 12mm
Sheet Metal Screw
(16 pcs)
#105. M5 x15mm
Phillips Head Screw
(18 pcs)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE295 2011-2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE295 2011-2012 in the language / languages: English as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info