518564
19
Zoom out
Zoom in
Previous page
1/32
Next page
15
Elliptical Trainer
XE295
This is the quickest way to start a workout. After the console powers
up you just press the Start key to begin, this will initiate the Quick
Start mode. In Quick Start the Time will count up from zero and the
workload may be adjusted manually by pressing the Level Up/
Down buttons. The dot matrix display will have only the bottom row
lit at rst. As you increase the work load more rows will light indicating
a harder workout. The elliptical will get harder to pedal as the rows increase.
There are 20 levels of resistance available for plenty of variety. The rst 5 levels are very easy
workloads and the changes between levels are set to a good progression for de-conditioned
users. Levels 6-10 are more challenging, but the increases in resistance from one level to the
next remain small. Levels 11-15 start getting tough as the levels jump more dramatically. Levels
16-20 are extremely hard and are good for short interval peaks and elite athletic training.
Quick Start
The Message Center will initially be displaying the Program name.
When in scan mode during a program, speed will be displayed for four
seconds, then move on and display Watts (indication of workload). If
100 watts is displayed, you are doing enough work to keep a 100-watt
light bulb lit. The data changes to Laps completed, Segment time, Max
level. Pressing the Enter button again will bring you back to
the beginning.
The Stop button actually has several functions. Pressing the Stop key
once during a program will pause the program for 5 minutes. If you
need to get a drink, answer the phone or any of the many things that
could interrupt your workout, this is a great feature. To resume your
workout during Pause, just press the Start key. If the Stop button is
pressed twice during a workout, the program will end and the console will display your
Workout Summary (Total time, Avg. Speed, Avg. Watts, Avg. HR, total Laps). If the Stop key is
held down for 3 seconds or a third time during the program, the console will perform a
complete Reset. During data entry for a program the Stop key performs a previous
screen or segment function. This allows you to go back to change programming data.
Basic Information
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE-295 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE-295 2013 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spirit XE-295 2013

Spirit XE-295 2013 User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info