583902
12
Zoom out
Zoom in
Previous page
1/32
Next page
8
Fitness Bike
XBU55
1. Insert the Computer Cable (29) and two Hand pulse cables (26, 28) into the connectors in the back of the
Console (34). Install the Console (34) onto the Console Mast (2). Install the four Phillips Head Screws (58)
with the Phillips Head Screw Driver (93).
2. Install the Front Stabilizer Cover (40) and the Rear Stabilizer Cover (41) onto the Main Frame (1) with four
Phillips Head Screws (58). Tighten using the Phillips Head Screw Driver (93).
3. Install the Pedals (45L, 46R) onto the Crank arms (16L, 16R). Remember that the left pedal has a reverse
thread and will be screwed into the crank in the opposite rotation from normal threads. There is an “L stamped
into the end of the threaded post of the left pedal and an “R” in the right. Make sure to tighten the pedals as
much as you possibly can. It may be necessary to re-tighten the pedals if you feel a thumping while pedaling the
bike. A noise or feeling such as a thumping or clicking is usually caused by the pedals being too loose. Tighten
using the Wrench (92).
4. Install the Seat mount slide (7) (post at the front) onto the track on top of the seat bracket (6) by sliding a Flat
Washer (71) onto the seat adjustment knob (86), then slide it through the slots of each and attach a ange nut
(8) to the end. Install the seat (19) onto the seat post by securely tightening the nut on each the side, below the
seat.
5. Install the Drink Bottle Holder (116) onto the Console Mast (2) with two Phillips Head Screws (58). Tighten
using the Phillips Head Screw Driver (93).
HARDWARE
STEP 4: Console, Seat, Covers & Pedals
#58. M5 x 12mm
Phillips Head Screw
(10 pcs)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XBU55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XBU55 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info