584044
18
Zoom out
Zoom in
Previous page
1/34
Next page
XBR95 & XBU75
17
STEP 4: CONSOLE, SEAT, PEDALS AND BEAUTY COVERS ASSEMBLY
1. Insert the Computer Cable (29), handlebar switch cable (110) and two Hand pulse cables (26)
into the connectors in the back of the Console (34).
2. Install the Console (34) onto the Console Mast (2) with the four M5x12mm Phillips Head
Screws (58).
3. Install the Front Stabilizer Cover (40) and the Rear Stabilizer Cover (41) onto the Main Frame (1)
with the four M5x12mm Phillips Head Screws (58).
4. Install the Pedals (45 L, 46R) onto the Cranks by using 13/15mm Wrench (92). Remember that
the left pedal has a reverse thread and will be screwed into the crank in the opposite rotation
from normal threads. There is an  stamped into the end of the threaded post of the left pedal
and an  in the right. Make sure to tighten the pedals as much as you possibly can. It may be
necessary to re-tighten the pedals if you feel a thumping during pedaling the bike. A noise or
feeling such as a thumping or clicking is usually caused by the pedals being too loose.
5. Install the Seat mount slide (7) onto the track on top of the seat tube with the seat post facing
forward. Install the nut plate (8) into the seat slide behind the seat post. Install the flat washer
(71) onto the for/aft adjustment knob (86) and screw into the nut plate from underneath the seat
tube track. Install the seat (19) onto the seat post by using the 12/14mm Wrench (100).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XBR95 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XBR95 2007 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info