583899
10
Zoom out
Zoom in
Previous page
1/24
Next page
8
Fitness Bike
XBR25
1. Remove the Button Head Socket Screws holding the clamps of the left Release Lever (40) by using the Allen
Wrench (115). Install the Release Lever (40) onto the Handle Bar Seat (6) just behind the Hand pulse sensors
on the left side (when facing the front of the bike). Install it at an angle that allows easy access for use, then rein-
sert and tighten the socket screws removed earlier. Don’t over tighten these screws.
2. Secure the Steel Cable (59) to the Seat Handle Bar (6) with the Velcro Tape. Wrap the tape around the
handlebars in places that will be under the beverage holders so they are out of sight.
3. Attach the Pedals (L, R)(116,117) to the Crank Arms (51L, 51R). Tighten with the Wrench (132). Remember
that the left pedal has a reverse thread and will be threaded onto the Crank arm in a counterclockwise motion.
There is an “L stamped in the end of the threaded post of the left pedal and an “R” in the right. Make sure to
tighten the pedals as rmly as you can. It may be necessary to re-tighten the pedals if you feel a thumping while
pedaling the bike. A thumping or clicking noise is usually caused by loose pedals.
4. Attach the Drink Bottle Holders (L39 & R38) to the sides of the Seat Handle Bar (6) with four Sheet Metal
Screws (105). Tighten with the Phillips Head Screw Driver (114).
HARDWARE
STEP 4: Plastic Parts
#105. 4 x 16mm
Sheet Metal Screw
(4 pcs)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XBR25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XBR25 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info