583985
12
Zoom out
Zoom in
Previous page
1/27
Next page
ET6 / ET8 / ET10
11
Assembly ( ET10 )
STEP 1
Remove all parts from the carton.
STEP 2
Connect the lower Computer Cable with the upper Computer Cable.
STEP 3
Hand tighten Right and Left Uprights into Main Frame with two 3/8 x 2 Button Head Socket Bolts, two
3/8 x 2T Split Washers and six 5/16 x 1/2 Button Head Socket Bolts by using the
Combination M5
Allen Wrench & Phillips Head Screwdriver and M6 Allen Wrench.
STEP 4
Install the Upright Support onto the Left and Right Uprights with four 5/16 x 3/4 Button Head Socket
Bolts, by using the Combination M5 Allen Wrench & Phillips Head Screwdriver.
STEP 5
Connect the middle Computer Cable with the upper Computer cable from the console.
Connect the Speed Switch Cable with the upper Speed Cable from the console.
Connect the Incline Switch Cable with the upper Incline Cable from the console.
STEP 6
Install the Console Support into the Right and Left Uprights with four 5/16 x 1/2 Button Head Socket
Bolts, by using the Combination M5 Allen Wrench & Phillips Head Screwdriver. Then Install the
Beverage Holder onto the Console Support. * Tighten all screws installed in STEP 4.
STEP 7
Install the four speed Nuts into side of the Top Motor Cover.
STEP 8
Install Frame Base Cap (R) and Frame Base Cap (L) with two 5 x 16 m/m Tapping Screws and four 5 x
16 m/m Tapping Screws by using the Combination M5 Allen Wrench & Phillips Head Screwdriver.
PLEASE LOCK DOWN ALL HARDWARE AFTER THE ACCESSSORIES HAVE BEEN
ASSEMBLED.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit ET6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit ET6 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info