584039
14
Zoom out
Zoom in
Previous page
1/20
Next page
ET288/ET388
13
GETTING STARTED:
Power the treadmill on by plugging it into a grounded wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as
the treadmill will not operate without it.
When the power is initially turned on, the display will light up and then show an Odometer reading
in the Distance window. The odometer reading shows how many virtual miles the treadmill gone.
The console will now be in idle mode, which is the starting point for operation.
QUICK START:
After the treadmill is powered on and the safety key is in place simply press the START key. The
treadmill will start at the minimum speed of 0.5 mph, the time will count up from zero and all data
will begin to accrue. You can adjust the speed manually by pressing the Fast and Slow buttons and
you can adjust the Incline with the Up and Down buttons.
WINDOW DISPLAYS:
SPEED Shows your current walking/running speed in Miles Per Hour.
TIME: Accumulates total workout time from 00:00 to 99:59.
DISTANCE: Accumulates total workout distance from 0.00 to 99.99 miles (km).
CALORIES: Accumulates the users calorie consumption during exercise.
PULSE/INCLINE: Shows your heart rate in beats per minute when the hand pulse sensors are
held. If no heart rate is detected the window displays the running deck incline
in percent grade.
BUTTON FUNCTIONS:
START/STOP: Press the START/STOP button to begin or end a program.
FAST: Press the FAST button to increase your speed.
SLOW: Press the SLOW button to decrease your speed.
UP: Hold down to increase incline level
DOWN: Hold down to decrease incline level
ENTER: Press the ENTER button to set the Timer. During a program press the Enter
key to switch the main display to show different data.
SAFETY KEY: Put safety key in position to enable the computer. When the safety key is pulled
away from its position, the computer will automatically shut down the motor.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit ET388 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit ET388 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info