583982
9
Zoom out
Zoom in
Previous page
1/21
Next page
EL355 Elliptical
8
STEP 1: CONSOLE MAST ASSEMBLY
1. Locate the Console Mast (10) and Console Mast Cover (41) and slide the Cover onto the
Mast as far as it will go. Make sure the Console Mast Cover is facing the correct way.
2. At the top opening of the Main Frame (1) there is a Computer Cable (32) attached to a
guiding wire. Unravel the wire and feed the Computer Cable into the bottom of the
Console Mast tube and out of the top opening.
3. Install the Console Mast (10) into the receiving bracket on the top of the Main Frame. Pull
slightly on the computer cable at the top of the mast while installing, this will ensure the
cable does not get pinched and shorted during mast assembly.
4. Install two 3/8" Split Washers (120) and two 3/8” Curved Washers (114) onto one of the
3/8" x 3-3/4" Hex Head Bolt (119) and the 3/8" x 3/4" Hex Head Bolt (121), then install
through the front of the Console Mast; just hand tighten for now. Install two 3/8” Flat
Washers (94) and two 3/8" Split Washers (120) onto two 3/8" x 3-3/4" Hex Head Bolts
(119). Install them through the left side of the receiving bracket into the Console Mast.
Now tighten all 3 bolts as tight as possible and snap the console mast cover into place.
5. There are three connectors at the top opening of the Console Mast; two Hand pulse
wires (37) and one Computer Cable (32). Connect these to the mating connectors on the
back of the Console Assembly (31).
6. Store the excess wiring back into the Console Mast (10) as you carefully install the
Console Assembly (31) onto the mounting plate of Console Mast. Secure the console
with four M5 Phillips Head Screws (78).
Assembly Instructions
FOR
EL355
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit EL355 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit EL355 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info