583979
9
Zoom out
Zoom in
Previous page
1/22
Next page
EL1 Elliptical
8
STEP 3: CONNECTING ARM ASSEMBLY
1. Align the hole in the end of the Connecting arms (L&R)(pivoting rod end) with the hole
in the bracket of the Lower Handle Bars (L&R). The rod end should be on the inside of
the Lower Handle Bars (L&R) bracket. Take 2pcs of 5/16" x 1-1/4" Hex Head Screws
and install it through the Lower Handle Bars (L&R) bracket and the rod end. Install
2pcs of 5/16" x 20 x 1.5T Flat Washers, 2pcs of 5/16" x 7T Nyloc Nuts tighten firmly
using the 12m/m Wrench on the 5/16" x 7T Nyloc Nut and one on the 5/16" x 1-1/4"
Hex Head Screw.
2. Install the 2 pcs of Rails into the receiving bracket in the end of Main Frame with 2 pcs
of 3/8 x 2-1/4 Button Head Socket Screws, 2pcs of 3/8" x 19 x 1.5T Flat Washers and
2 pcs of 3/8" x 7T Nyloc Nut by using 2 pcs of 13/14m/m Wrench.
3. Put the Lug Covers (L&R) onto the Rail Strap. Slip the Rail Strap through the slots in the
Lug Covers, then Install onto the Rails with 2 pcs of 5/16 x 3/4 Button Head Socket
Screws and 2 pcs of 5/16" x 20 x 1.5T Flat Washers by using Combination M5 Allen
Wrench & Phillips Head Screw Driver.
STEP 4: PLASTICS ASSEMBLY
1. Install the Connecting Arm Covers (L & R) over the connection of the rod end and
Lower Handle Bars (L & R) with 4pcs of M5 x 15m/m Phillips Head Screws and 2pcs of
3.5x12m/m Self Tapping Screws by using the Combination M5 Allen Wrench & Phillips
Head Screw Driver.
2. Install the 2pcs of Wheel Covers using the 4pcs of M5x15m/m Phillips Head Screws.
3. Install the Front Handle Bar Cover (L & R) and Rear Handle Bar Cover (L & R) over the
Handle Bars axle connections with the 6 pcs of 3.5x12m/m Self Tapping Screws by
using Phillips Head Screw Driver.
PLEASE ENSURE ALL FASTENERS ARE TIGHT AFTER THE COMPONENTS HAVE
BEEN ASSEMBLED.
POWER CONNECTOR LOCATED ON
FRONT, LEFT HAND SIDE OF UNIT.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit EL1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit EL1 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info