680619
18
Zoom out
Zoom in
Previous page
1/68
Next page
4. Maintenance Instructions
The pressure tank unit is entirely maintenance-free.
If the pump gets blocked it will first have to be rinsed out.
Connect the pump after removing delivery pipe to the
water pipe and let water flow into the suction pipe.
While water is flowing into the pump, engage it several
times for about 2 seconds.
In this way it is possible to eliminate most blockages.
J5C74A48B0A8B:>55A>BCC74?D<?70BC>144<?C843
completely.
J-74=C74?D<?8B=>C6>8=6C>14DB435>A0;>=6C8<4
for instance in the winter period, it is recommended to
rinse out the pump thoroughly with water, empty it
completely and store it in a dry place.
J 742: F74C74AC74 ?D<? F>A:B 5A44;H1H 1A845;H
connecting and disconnecting it.
J*74=58;;C74?D<?0608=F8C7C7434;8E4AH;8@D830=3B4C
it up for use.
Adjusting connection and cut-off pressure.
The pressure tanks unit are factory set with an operating
pressure of 1,482,8 or 1,683,2 bar (see table of
specifications). The connection and cut-off pressure can
be adjusted and may be set the desired pressure onto
according to your need by means of the switch (see
figure).
1 = Connection pressure
2 = Cut-off pressure
Take the protective cover off the pressure
switch. With a screwdriver, turn onto - or +
according to need. Check the pressure with
the pressure gauge.
CAUTION!
In order to work, the pump must always be filled
with the delivery liquid until it overflows!
Caution: The pump must never run dry. The
manufacturer’s warranty is null and void in the
event of damage to the pump caused by its running
dry.
Check that the pump is airtight; piping that is not
airtight draws in air preventing the pump from
working properly.
If it is not possibile to eliminate the trouble, please call our service department.
To avoid damage during transport, please ship in the ORIGINAL PACKING.
5. Troubleshooting Table
Trouble Cause Remedy
Motor will not start
Pump will not suck
Insufficient rate of flow
The thermal cut-out switch cuts
off the pump
J $><08=BE>;C064
J &D<?8<?4;;4A90<<43
Thermostat detached.
J742:E>;C064
J8B<0=C;4C74?D<?0=32;40=8C
J )D2C8>=E0;E4=>C8=F0C4A
J &D<?270<14AF8C7=>F0C4A
J 8A8=BD2C8>=?8?4
J )D2C8>=E0;E4=>C08AC867C
J )D2C8>=A>B4BD2C8>=E0;E42;>6643
J #0GBD2C8>=74867C4G244343
J &DCC74BD2C8>=E0;E48=C>F0C4A
(min. 30 cm.)
J &>DAF0C4A8=C>C74BD2C8>=D=8>=
J 742:C74B40;>5C74BD2C?8?4
J ;40=C74BD2C8>=E0;E4
J ;40=C74BD2C8>=A>B4
J 742:C74BD2C8>=74867C
J )D2C8>=74867CC>>7867
J 8ACHBD2C8>=A>B4
J -0C4A;4E4;50;;B@D82:;H
J &D<?5;>FA0C4A43D2431H5>A486=
bodies.
J742:BD2C8>=74867C
J;40=C74BD2C8>=A>B4
J)4CC74BD2CE0;E4;>F4A3>F=
J;40=C74?D<?0=3A4?;024C74F>A=
parts.
J #>C>A>E4A;>0343
Friction too great due to foreign bodies.
J;8<8=0C4C745>A486=1>384B
Wait for the thermal cut-out switch to
CA8664A0608=0??A>G<8=B
Pump connects with very low
water intake
J &A4BBDA4>508A2DB78>=8=C7434;8E4AH
tank too low.
JIncrease the pressure of the air cushion
in the filling valve (1.5 bar)
15
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Speroni RSM 5-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Speroni RSM 5-60 in the language / languages: All languages as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info