680542
15
Zoom out
Zoom in
Previous page
1/24
Next page
10
DIFETTI CAUSE RIMEDI
Mandata insufficiente
La pompa non aspira
La pompa non parte
- la valvola di aspirazione non è
nell’acqua
- corpo pompa senza acqua
- aria nel tubo di aspirazione
- valvola di aspirazione che perde
- valvola di aspirazione ostruita
- è stata oltrepassata la profondità
di aspirazione max.
- non arriva corrente
- girante bloccata,intervento
protezione termica
Interruttore termico blocca la pompa
- controllare che ci sia la tensione
adeguata nella rete elettrica
- smontare e pulire la pompa
- sbloccare la pompa
- collocare la valvola di aspirazione
in acqua
- riempire d’acqua il tubo in
aspirazione
- controllare la tenuta del tubo
di aspirazione
- pulire la valvola di fondo
- controllare la profondità
d’ aspirazione
- smontare e pulire la pompa,
evitare l’aspirazione di materiale
estraneo. Aspettare fino a quando
il termico si ripristina (circa 20 min.)
- motore sovraccarico a causa di
troppa frizione
- controllare la profondità
d’aspirazione
- pulire la valvola di fondi
- collocare la valvola di fondo
più in profondità
- pulire la girante e sostituire
le parti usurate
- profondità d’aspirazione troppo
elevata
- valvola di fondo ostruita
- il livello dell’acqua si abbassa
velocemente
- capacità della pompa ridotta a
causa di materiali estranei
FAULTS CAUSES REMEDIES
Insufficient delivery
Pump does not suck
Pump does not start
- intake valve not in water
- no water in pump body
- air in suction pipe
- intake valve leaks
- intake valve clogged
- max.suction depth exceeded
- lack of electrical current
- rotor blocked , thermal
protection tripped
Thermal switch stops the pumps
- make sure the mains voltage is
suitable
- disassemble and clean the pump
- unclamp the pump
- pump intake valve in water
- fill suction pipe with water
- check suction pipe seal
- clean valve thoroughly
- clean suction basket
- check suction depth
- disassemble and clean pump take
measures to prevent suction of
foreign material. Wait until the
thermal switch reacts ( approx.20 min.)
- motor overload caused by
excessive friction
- check suction depth
- clean valve thoroughly
- situate foot valve deeper
- clean rotor and replace worn-out parts
- too high suction depth
- foot valve obstructed
- water level goes down rapidly
- reduced pump capacity due
to foreign bodies
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Speroni CBM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Speroni CBM in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 13,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info