708113
31
Zoom out
Zoom in
Previous page
1/50
Next page
31SPEKTRUM DX7 • TRANSMITTER INSTRUCTION MANUAL
EN
FUNCTION LIST
The Speed menu enables you to slow the response time on any
individual channel (such as retracts).
The Speed is adjustable in the following ranges:
Nor (No Delay) – 0.9s in 0.1 second increments
1s – 2s in 0.2-second increments
2s – 8s in 1-second increments
To adjust the Speed:
1. Scroll to the channel
you wish to adjust
and press the scroll
wheel.
2. Scroll left or right
to adjust the speed
and press the scroll
wheel to save the
selection.
Balance is available on all channels to fi ne-tune the servo position
at up to 7 points. This is a precision curve mix that is normally
used to prevent binding when multiple servos are used on a single
control surface.
You can also use the Balance menu option to match throttle
response on twin engine aircraft or level the swashplate on a
helicopter.
When using a compatible AS3X receiver (AR636, AR6335,
AR9350, etc.), Gain Live View allows
Real time display of gain values for Roll Pitch and Yaw
Allows gains to be adjusted from the roller
Selection of the channel that is used to adjust gains (must match
application)
Selection of the switch that is used to change fl ight modes
To activate AS3X Gain Live View:
1. In the telemetry screen in one of the empty positions select
AS3X and activate the Display. This will activate the AS3X Gain
menu in the Function List.
2. In the Function List Access the AS3X Gain menu. If an AS3X
receiver is bound to the transmitter and the receiver and
transmitter are on, live gain values will be displayed on this
screen.
Axis: Roll Pitch and Yaw gain are displayed to the right of each Axis
Rate: Rate gain values are displayed here
Heading: Heading gain values are displayed here
Actual: The current gain value is displayed here. Note that this value
takes into account the priority gain and the stick position of
that channel
Gain: This value represents the position of the input (roller or knob)
Input: Allows the selection of the roller to be used to adjust the gain
Channel: Must correspond to the channel selected in the AS3X
application in the FM Channel Assignment screen
FM Switch: Selects the switch on the transmitter that is used to
select the fl ight modes in the AS3X system
Note that relative (REL) must be selected in the application’s gain
screen to allow adjustable gain from the transmitter.
Please see the following web address for videos and information
about setting up the AS3X application, Live View and adjusting the
gain from the transmitter.
http://www.spektrumrc.com/Technology/AS3X.aspx
Speed
Balance
AS3X Gain Live View (ACRO and SAIL Types only)
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX7 in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX7

Spektrum DX7 User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info