726853
5
Zoom out
Zoom in
Previous page
1/42
Next page
5SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
EN
TRANSMITTER BATTERIES
• Read all safety precautions and literature prior to use of this product
Never allow minors to charge battery packs
Never drop charger or batteries
Never attempt to charge damaged batteries
Never attempt to charge a battery pack containing different types
of batteries
Never charge a battery if the cable has been pinched or shorted
Never allow batteries or battery packs to come into contact with
moisture at any time
Never charge batteries in extremely hot or cold places (recom-
mended between 50–80 degrees F or 10–27 degrees C) or place
in direct sunlight
Always disconnect the battery after charging, and let the charger
cool between charges
Always inspect a new battery before charging
Always terminate all processes and contact Horizon Hobby if the
product malfunctions
Always keep batteries and charger away from any material that
could be affected by heat (such as ceramic and tile), as they can
get hot
Always end the charging process if the charger or battery be-
comes hot to the touch or starts to change form (swell) during the
charge process
Battery and Charging Precautions and Warnings
Failure to exercise caution while using this product and comply with the following warnings could result in product malfunction,
electrical issues, excessive heat, FIRE, and ultimately injury and property damage.
Charging Your Transmitter
The DX18 has an internal charger designed to charge the
included 2-cell LiPo battery at a charge rate of 200mAh. The
charge port on the right side of the transmitter is not polarity-
dependent.
NOTICE: Never connect an external battery charger to your
DX18 transmitter. If you wish to charge the LiPo battery using a
LiPo charger, you must remove the battery from the transmitter
before charging.
The fi rst time you charge the transmitter battery, the charge time
may be 12-15 hours. Always charge the transmitter on a heat
resistant surface.
1. Power off your transmitter.
2. Connect the power supply connector to the transmitter
charge port.
3. Connect the power supply to a power outlet using the appro-
priate adapter.
4. The blue LED on the front of the transmitter turns on during
charging and turns off when the battery is fully charged.
5. Disconnect the transmitter from the power supply once
charging is complete and disconnect the power supply from
the power outlet.
CAUTION: Never leave a charging battery unattended.
LED indicators
The blue LED indicates the transmitter battery is charging. The
orange LED indicates the transmitter is powered on and there is
radio transmission.
Battery Alarm
The System Settings Screen allows you to change the battery
type and low alarm settings. See “System Settings” for more
information.
• An alarm will sound when the battery reaches the low volt-
age limit (4.3V for NiMH, 6.4V for LiPo).
CAUTION: Never change the low voltage limit for LiPo
batteries from 6.4V. Doing so could over-discharge the
battery and damage both battery and transmitter.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX18 - SPM18000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX18 - SPM18000 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX18 - SPM18000

Spektrum DX18 - SPM18000 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info