Manual Spektrum DX 2.0 (page 6 of 32) (English)

726847

Zoom out

Zoom in

1/32

During the ﬁrst installation, the receiver(s) must be bound to the transmitter. Binding is

necessary to program the receiver(s) to distinguish its corresponding transmitter from

others. Also fail-safe positions are transferred from the transmitter to the receiver during

binding. See binding below for more details.

It is necessary to bind the receiver to the transmitter during the ﬁrst installation, and is

recommended when the receiver is moved from one vehicle to another. Receivers can be

re-bound to the same transmitter or to other transmitters an inﬁnite number of times. Also

multiple receivers can be bound to a single transmitter, common when using one transmitter

to operate several models.

Only bound receivers and transmitters can connect. During power-up, the transmitter scans

for a free channel while the receiver scans for its bound transmitter. During the scanning

process, LEDs on both the transmitter and receiver ﬂash rapidly. When control is achieved,

the LED remains on continuously.

In the unlikely event that the link is lost during use, the receiver will drive the servos to

their fail-safe positions that were preset during the binding process. If the receiver is turned

on prior to turning on the transmitter, the receiver will enter the fail-safe mode, driving the

servos to their preset fail-safe position. When the transmitter is turned on, normal control is

resumed.

To bind the receiver to the transmitter

1. Make sure the transmitter and receiver are turned off

43

"69

5)3

453

#"55&-

%4.(I[

463'"$&64&0/-:

ª)PSJ[PO)PCCZ*OD

Binding

Bind Button

LED

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spektrum DX 2.0 Manual

Product: