477774
7
Zoom out
Zoom in
Previous page
1/17
Next page
SpectraLink Corporation Configuring NetLink Wireless Telephones
NetLink Configuration Cradle
Part Number: 72-0175-01-C.doc Page 7
4. Planning the Configuration Files
Each configurable option may be categorized as one of three types: System (Sys),
Group (Grp) or User (Usr). System level options should be those that are stable across
the entire system. DHCP vs. Static IP addressing would be an example of a System
option. Options that are designated as Group type should be those that change by
category of user. PTT Allow/Disallow and PTT Channel are examples. A unique
extension number is assigned to each handset by the system administrator and would
be a User type. The remaining User types should be reserved for options that are
normally set by the end user. For Standby menu options such as Ring Type and
Noise Mode, default values may be entered with the expectation that the user may
change them.
4.1 Typical configuration plans
Because the specific options that are available depend on the software version and
License Option, the typical plan options for your facility may be different than those
listed here.
Typical System file settings:
System file settings typically do not change across an installation. These are typical
Sys categories:
License Option
Network Config
IP Addressing
ESSID
Security
Typical Group file settings:
If certain groups of people require different access to functions, such as push to talk,
these options would be stored as Group files. Several different Group files can be
established and the handsets can be configured by group. Typical
Grp categories are:
Push-to-talk options on both Admin and Standby menus
Typical User file settings:
If a setting can be changed by the user in the Standby menu, then it would typically
be stored in a User file. These can be the default settings or whatever your system
requires. Typical
Usr categories are:
Extension
Static IP address
Ring Options
Phone Options
You may have zones in your facility that require different System settings,
such as security. These settings can be moved to a Group file or you may set
up two System files.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spectralink h340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spectralink h340 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info