552579

Speaka 989272 Manual

2
Zoom out
Zoom in
Previous page
1/6
Next page
╞
OPERATING INTRUCTIONS
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.
Version 11/12
TV wall bracket 81-152 cm (32-60”) fi xed
Item no. 98 92 72
Intended use
The TV wall bracket is used to install suitable TV sets on walls.
The TV set should not exceed the size and weight values specifi ed in “Technical Data”.
Any use other than the one described earlier can damage this product or the TV set, and is associated with
risks such as damage to furniture in the vicinity of the wall bracket, physical injury to persons etc.
No part of the product may be modifi ed or altered.
The safety instructions must be observed at all times.
Package Contents
See Figure 1 on the sheet attached to this manual.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe these safety
instructions! We will not assume liability for any resulting damage.
We shall not accept liability for damage to property or personal injury caused by incorrect
handling or non-compliance with the safety instructions. In such cases, the warranty will
be null and void.
The exclamation mark symbol indicates important information in these operating instruc-
tions.
The arrow symbol denotes tips and instructions
• A TV wall bracket is not a toy. Keep the device out of the reach of children.
• Do not leave packaging material lying around carelessly. They may become dangerous playthings for chil-
dren.
• Selecting an unsuitable installation location can lead to personal or material damage.
• Proceed with care when assembling and installing the product. The product can have sharp edges. There
is risk of injury!
• Only perform work that is necessary for the installation (or adjustment) of the TV wall bracket. Never attempt
alterations or repairs.
• Before starting the installation process, check whether there are appropriate mounting options for the TV
wall bracket on the rear of your TV set.
• Depending on the size and design of the TV set and TV wall bracket, a second person should help with the
installation. This person can for example, hold the TV set when you mount the TV set on the wall bracket.
• Apply your full concentration when carrying out the installation, because if the TV set and/or TV wall bracket
falls, this could cause expensive consequential damage to the equipment and there is increased risk of
personal injury!
•
Route all the TV set’s cables in such a way that they do not get jammed or kinked in the TV wall bracket.
• Do not overload the TV wall bracket. Pay attention to the details provided by the manufacturer for the
maximum weight and/or size of the TV set.
• Do not use the TV wall bracket to support yourself or hold on to it.
• Do not mount any object on the TV wall bracket other than the TV set intended for it.
• In case of uncertainty, do not perform the installation on your own. Engage a skilled person to do the job.
Installation
Wall-mounting is permissible only if the wall concerned is of the correct type and con-
dition. Lightweight partition walls or those made from gypsum boards are normally un-
suitable. However, specialist retailers do sometimes stock special dowel fi ttings for such
installation locations. If you are in doubt, ask a specialist before installation.
Suitable mounting materials must be used (screws, dowels, etc.), depending on the base
wall material (e.g. concrete). The attached dowels are suitable exclusively for solid walls.
Special dowels and screws do not come with the TV wall bracket and must be purchased
separately, depending on the quality of the wall.
Due to the weight of the TV set, the TV wall bracket and the lever action involved, ensure
that screws are fi xed securely.
Plan the installation location carefully so that the TV wall bracket holding the TV set is in the
desired position (height and position) after the installation.
When drilling holes and tightening screws, ensure that no cables or pipes are damaged. If
electric cables are drilled through inadvertently, there is danger of fatal electric shock!
Pay special attention to your safety when using electric tools (e.g. a drill). Heed the safety
instructions in the corresponding chapters of this manual.
During installation, ensure that no persons are located under the TV wall bracket or under
the TV set.
Please follow the fi gures on the sheet attached to this manual.
Preparation of the TV set
• Normally, the existing stand of the TV set must be removed before mounting it on the TV wall bracket.
Observe the operating instructions for your TV set.
• Place the TV set fl atly with the screen facing downwards on a soft and clean supporting base. Do not exert
any pressure on the screen. Protect valuable furniture surfaces during installation by using a suitable pad
or cloth.
• Remove the existing stand. It is either screwed tightly or clipped, depending on the TV set.
Figure 2
• Defi ne the position and height of the mounting frame at the installation location.
• Adjust the mounting frame horizontally with the help of the integrated spirit level.
• Mark the necessary drilling holes on the mounting surface. Use the mounting frame as stencil.
• Drill the required holes and provide them with suitable dowels (B or special dowel).
• Fix the mounting frame with suitable screws (A or screws fi tting the dowels) and fl at washers (C).
Figure 3
• Fix the two installation clamps with suitable screws (D-G) and fl at washers (N or O) on the rear side of your
TV set.
• When installing the clamps, ensure that the snapping interlocks on the fl aps point to the bottom of the TV
set.
When fi xing the installation clamps at the rear of the TV set, make absolutely certain that
you use the correct screws. Not only must these have the correct thread type for the TV set,
but they must also not be too long; as otherwise the TV set may be damaged.
However, the screws must not be too short, as otherwise the connection will not be
secure. They must be screwed into the corresponding threads of the TV set with at least
5 full 360° turns.
If you have any doubt about the correct length of the screws, contact the manufacturer of
the TV set or an appropriate specialist.
• Do not use any force when tightening the screws; otherwise the TV set may be destroyed, leading to loss
of warranty/guarantee!
• If your TV set has an arched rear, or the distance from the wall must be increased for other reasons, you
can insert spacers (L or M) between the TV set and the installation clamp. In this case, the longer screws
(H-K) must be used for the mounting.
Figure 4
• Lift the TV set with the installed clamps from the top on to the mounting frame. The TV set must be inclined
slightly towards the wall.
• The upper grids of the mounting clamp must engage cleanly in the section of the mounting frame.
• Align the TV set at the centre of the frame and tilt it until it is supported by the lower part of the mounting
frame.
• Pull the loops of the safety strap, so that the lower grids may engage in the mounting frame.
Maintenance and Care
The product does not have to be serviced and, except for occasional cleaning with a soft, dry cloth, requires
no maintenance whatsoever.
Never use aggressive cleaning agents or chemical solutions as these may damage the surface of the case.
Technical Data
TV size .........................................81-152 cm (32-60“)
Load capacity ..............................max. 45 kg
VESA mount ................................max. 600 x 400
Wall distance ...............................16 mm
Material ........................................ steel
╞
OPERATING INTRUCTIONS
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Speaka 989272 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Speaka 989272 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info