552583

Speaka 631819 Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
Figure 3:
When xing the mounting plate to the TV set, make absolutely certain that you
use the correct screws. Not only must these be of the correct thread type for
the TV set, but they must also not be too long; otherwise they will damage the
TV set.
The screws must not be too short, however, since otherwise the connection
will not be secure. The screws must be screwed into the threaded xture holes
on the TV set with at least 5 full 360° turns.
Should the screw length of the screws in the enclosed mounting screw set (M)
not be suitable for your TV set, please acquire suitable screws at your local
hardware store.
If you have any doubt about the correct length of the screws required, we rec-
ommend that you contact the TV manufacturer or an appropriate specialist.
Make absolutely certain that the mounting plate is mounted in the centre of the
TV set.
• Attach the base plate with suitable screws and washers from the mounting screw set (M) to
the back of your TV set.
Make sure to mount the base plate the right way round. The arrow on the base plate
with the label UP must point upward.
• If the back of your TV set is curved or if you want to mount the TV set at a greater distance
from the wall, you can insert one or two of the provided spacers (M-G) between the base plate
and the back of the TV.
• Do not use any force when tightening the screws; otherwise the TV set may be destroyed,
leading to loss of warranty/guarantee!
Figure 4:
It may be that the installation screws in the centre of the base plate need to be
loosened or tightened somewhat. To do so, use the 4 mm Allen key (H) from the
accessory set.
• Lift the TV set with the base plate on the wall bracket as shown in the image.
• The shoe of the base plate must be installed properly in its counterpiece on the wall bracket.
• Secure the base plate with the safety catch (G) to the wall bracket as shown in the image.
Figure 5:
• Tighten the two hinges of the wall bracket with the Allen keys (I and H) so that the hinges can
be moved easily but have no play. This should be repeated from time to time in later use, since
the hinge screws can become somewhat loose from moving the TV wall bracket.
• Connect the connection cables to your TV set and run them through the cable holder on the
wall mounting plate.
• Also, secure the cables with the cable holders (C and D) on the arm of the wall bracket.
When laying the cables, leave enough manoeuvring room so that the cables are not
strained or trapped when you move the wall bracket.
Figure 6:
• The TV screen can now be pivoted, tilted or turned as shown in the image.
Maintenance and care
The product does not have to be serviced and, except for occasional cleaning with a soft, dry
cloth, requires no maintenance whatsoever.
Never use aggressive cleaning agents or chemical solutions as these may damage the surfaces.
Technical data
TV size .................................. 58-107 cm (23-42”)
Load capacity ....................... max. 25 kg
VESA fastening ..................... 75x75
.............................................. 100x100
.............................................. 200x100
.............................................. 200x200
Wall distance ........................58-450 mm
Tilt angle ............................... +10/-15°
Pivot angle ............................ ±90°
Material ................................. steel
Weight .................................. 2.2 kg
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Speaka 631819 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Speaka 631819 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info