810290

Spartherm Swing Insert Manual

18
Zoom out
Zoom in
Previous page
1/27
Next page
GB 18
5. SERVICE AND MAINTENANCE
CAUTION! Never clean your fireplace insert while it is hot or warm.
5.1 TYPE PLATE
The type plate can be found on your warranty certificate and on your fireplace
insert below the ash pan and/or the ash box. It includes technical data and
information. The type plate must not be removed as it confirms the testing of
the device and is required for the acceptance procedure and annual inspec-
tions by the chimney sweep.
5.2 ASH PAN AND GRATE
• Clean and empty the grate and ash pan at regular intervals, adapted to
suit your use of the fireplace. CAUTION! Ash can keep embers hot for up
to 24 hrs.
• The ash cone in the ash pan must not reach or block the slots in the grate.
• Always have the engraved side of grate facing downwards, located in the
recess in the bottom of the fireplace insert.
5.3 WINDOW
The way to ensure that your window panel remains soot free for as long as
possible is
• to use dry firewood (chapter „2.1.2 Types of wood“).
• to control combustion through adjustments to the flow of combustion air
(chapter „3. Burning“).
• to keep the fireplace insert at the highest possible combustion temperature
• to have the correct amount of draught in the chimney
• to add the right amount of wood for the operating range.
Gradual sooting up of the window is entirely normal and does not constitute
grounds for a complaint. Clean the inside of the window regularly using the
window cleaning agent provided to prevent particles of soot from burning in too
much (after approx. 8-12 operating hours)!
5.4 CLEANING AND MAINTENANCE
The fire area, the hot gas draught and the flue should be cleaned at regular
intervals. Specifically, whenever there is any extended interruption in opera-
tion of the fireplace, ensure that the chimney is not blocked.
For other conditions, refer to table:
What How often What with?
Outside of fireplace insert and
heating chamber
as required,
min. once a year
Brush, vacuum cleaner or
ash extractor
Glass pane based on fire
behaviour, for
optimum visibility, we
recommend after 8-12
hours of operation
You can easily clean the glass panel
with a commercially available cleaning
agent for fireplace glass.
Use dry cloth to wipe. No scouring.
Please do avoid that excess cleaning
agent enters between door frame and
glass panel. This might cause the
hardening of the sealing compound
between glass panel and door frame. A
hardened sealing compound might lead
to damages of door and glass.
Suitable cleaning agents for fireplace
glass are available at your specialist
dealer.
Decor finishes in
chrome or gold
as required Use dilute soapy lye and soft cloth. Do
not use abrasive agents. Do not polish!
Stainless steel surfaces as required Stainless steel cleaning product and a
soft cloth.
Painted surfaces as required Damp cloth without cleaning agent with
abrasive substances.
Hot air grille as required Duster or vacuum cleaner
Ash pan and grate as required Empty by hand or using special ash
extractor
Air space below ash pan as required Vacuum cleaner or ash extractor
Adapter between fireplace
insert and chimney
as required
min. once a year
Brush, ash extractor
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Swing Insert at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Swing Insert in the language / languages: English as an attachment in your email.

The manual is 1.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Swing Insert

Spartherm Swing Insert User Manual - German - 27 pages

Spartherm Swing Insert User Manual - Dutch - 27 pages

Spartherm Swing Insert User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info