Air-extracting equipment is switched on, e.g. kitchen extractor fan.3.1Ensure that all air-extracting equipment is switched off.
Wood added prematurely, on top of unburned wood.3.3Do not add fresh firewood until there is a bed of hot embers in the combustion chamber.
The chimney is not free.-Inform the chimney sweep.
Your fireplace has not already reached its operating temperature.3.2.1Burn down remaining wood until it forms a bed of hot embers, then add smaller pieces
of firewood.
The door has been opened too wide.3.3Open the door slowly and carefully.
Excessively rapid
burn-up / rate of
wood consumption
is too high.
The diameter of your stack of wood is too small.2.1.3The ideal diameter for a stack of wood is about 25 cm.
The chimney draught is too strong.-Inform the chimney sweep. Perhaps increase combustion air flow to counteract choking
action.
The combustion air flow has not been reduced.3.2.1Leave the actuating lever in about its center position.
Ever since the initial blaze, the fire door has been slightly open.3.2.1Close the fire door!
The recommended wood feed rate has not been observed.2.1.3The proper amount of wood feed per hour for your stove can be found in the technical
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Spartherm Swing Front at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Spartherm Swing Front in the language / languages: English as an attachment in your email.
The manual is 1.24 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
