744240
29
Zoom out
Zoom in
Previous page
1/53
Next page
GB
GB 29
about 15-20 minutes.
For better performance of the Senso M H2O / H2O Piko, wood should be refilled
in time in order to avoid an excessive drop in the flue gas temperature.
4. COMBUSTION
4.1 INITIAL COMMISSIONING
The stove must only be installed and set up by a specialised company. The
initial commissioning must only be executed by an expert employee of the
installation company. A certificate confirming proper installation and proper
adjustment / function of all control components and safety components must
be given to the owner / operator of the system (see „10. Commissioning
A
B
A
B
A = water heat exchanger
weak performance
B = water heat exchanger
maximum performance
Senso M H2O
Piko H2O
3.4 TYPE PLATE
The type plate is located both on your guarantee certificate, as well as on
your stove at the back or under the ash drawer. It includes technical data
and information. The type plate must not be removed as it confirms the
testing of the stove and is required for the acceptance procedure and annual
inspections by the chimney sweep.
3.5 OPERATION OF THE WATER HEAT EXCHANGER
SENSO M H2O / PIKO H2O
Operation of the water heat exchanger is done with the lever on the right
side on the back (see figure). This switches between heating-up/refuelling and
combustion. Intermediate positions of the lever are not provided.
Senso M H2O
Heating-up and combustion phase: The lever is at the top (A). The flue gases
are not passed through the heat exchanger of the Senso M H2O. Therefore, the
chimney draught can develop quickly and effectively.
Combustion position: The lever is pushed all the way down (B). Now all flue
gases are passed through the water heat exchanger of the Senso M H2O. This
position should only be chosen when the stove has fully heated up, the fuel
has started burning fully and embers have formed. Normally, this happens after
about 15-20 minutes.
Piko H2O
Heating-up and combustion phase: The lever is at the bottom (A). The flue
gases are not passed through the heat exchanger of the Piko H2O. Therefore,
the chimney draught can develop quickly and effectively.
Combustion position: The lever is pushed all the way to the top (B). Now all
flue gases are passed through the water heat exchanger of the Piko H2O. This
position should only be chosen when the stove has completely heated up, the
fuel started to burn and embers have formed. Normally, this happens after
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Senso S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Senso S in the language / languages: English as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Senso S

Spartherm Senso S User Manual - German - 52 pages

Spartherm Senso S User Manual - Dutch - 53 pages

Spartherm Senso S User Manual - Dutch - 44 pages

Spartherm Senso S User Manual - French - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info