Manual Spartherm Piko M (page 10 of 53) (English)

744252

Zoom out

Zoom in

1/53

GB 10

necessary combustion air pipes are open during the operation of the fireplace

insert. Simultaneous operation with a ventilation system (e.g. extractor hood,

bathroom fan, etc.) in the same room or connected space can adversely affect

the function of the stove (to the point of smoke or flue gas accumulating in the

living room, despite the firebox door being closed). It is therefore prohibited

to operate appliances of this kind simultaneously with a fireplace without first

taking appropriate precautionary measures („2.3.2.3 Room-air-independent“).

2.3.2.2 SEPARATE COMBUSTION AIR SUPPLY

The stove can be supplied with combustion air separately. The separate com-

bustion air connection can be connected to the rear side or from below. The

connecting piece is preassembled and the cladding must be opened accord-

ingly. When connecting a pipe connection to the combustion air neck, the

combustion air can be supplied to the stove from the outside or from other

rooms such as the cellar. When connecting the stove to a combustion air line,

the TROL instructions (technical rules), the DIN 18896, etc. must be observed

and applied.

In particular, ensure that the dimensions of the pipes are adequate!

When using the rotary base, the connection must be designed as

durable and flexible! The ability for it to rotate must not be affected.

The combustion air openings and lines must not be closed or blocked other than

if it has been ensured that the fireplace can only be operated with opened fas-

tening by special safety equipment. The cross-section must not be narrowed by a

fastening or a grille. This measure is not necessary with LAS chimneys. A shut-off

valve must be installed, where the combustion air feed line runs outside the build-

ing. In doing so, it must be possible to easily determine the shut-off valve setting

from outside of the connecting line. In this version, the pipe should be insulated

to prevent condensation. The pipe should be positioned, so that any condensation

formed can run out of the pipe and any water or other foreign substances from

outside cannot get into the stove. In accordance with regulations, combustion

air piping crossing a fire wall in buildings with more than two storeys must be

established in such a manner that smoke or fire cannot be transmitted to other

floors or fire compartments. Country-specific and local fire safety regulations

must be observed!

SPARTHERM QUICK COUPLING - SQC COUPLING

Compatible with the following stoves:

• Senso S

• Piko / Cubo S/M/L

• Passo XS

• Passo S/M/L

• Redoro S/M

The installation location of the stove must be determined according to the

specified technical data for the supply channel / hole. For direct wall mount-

ing, the combustion air and flue gas connection must be prepared on one

level. The stove is delivered with the fitted SQC coupling and the adjustable

feet extended. In this condition, the connecting piece is in the air, and there

is no contact to base unit. Therefore, the stove can be transported as usual

with the normal tools (e.g. sack truck).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Piko M in the language / languages: English as an attachment in your email.

The manual is 3.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Piko M

Spartherm Piko M User Manual - German - 52 pages

Spartherm Piko M User Manual - Dutch - 53 pages

Spartherm Piko M User Manual - Dutch - 44 pages

Spartherm Piko M User Manual - French - 57 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spartherm Piko M Manual

Product: