744254
20
Zoom out
Zoom in
Previous page
1/53
Next page
GB 20
2.3.7
INSTALLATION OF THE WATER-BEARING
COMPONENTS OF THE SENSO M H2O / PIKO H2O
Assembly of the water-bearing components, the necessary safety devices,
temperature sensors and similar components must always be carried out by
a specialised company. The Mellino H2O / Piko H2O must be installed with all
water-bearing components accessible and inspectable at all times!
The stove as well as all associated immersion sleeves, connectors, moulded
components and pipes must be have the pressure checked prior to commis-
sioning and checked for airtightness.
2.3.7.1 CONNECTIONS OF SENSO M H2O / PIKO H2O
The connections on the Senso M H2O are located on the back and can be
guided from the inside downwards using the flexible attachment kit. The Piko
H2O has its connections on the bottom which can be routed to the back and
the side with the flexible attachment kit.
The connections have transport caps and brass stops for transport purposes.
This must be removed prior to installation. The connections are clearly labelled
and must not be used other than for the specified purpose! In particular, the
integrated safety device (safety heat exchanger) must not be used to heat
water.
For easy installation of the pipes, etc. when during connection through
the floor, there is an installation template that can be downloaded on our
website www.spartherm.com in dealer login. The installation tem-
plate is valid only in conjunction with the flex attachment kit.
Alternatively, an installation template in the scale of 1: 1 can be requested in
print format from us. The flex attachment kit can be ordered for easy and quick
connection of pipes in the floor and the internal connections.
A = remove
B = Insert front stones
C = insert inner stone
D = insert cover stone (with
handle)
E = fit
Cubo M / Piko M:
E
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Piko H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Piko H2O in the language / languages: English as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Piko H2O

Spartherm Piko H2O Usermanual and installation guide - German - 52 pages

Spartherm Piko H2O Usermanual and installation guide - Dutch - 53 pages

Spartherm Piko H2O User Manual - Dutch - 44 pages

Spartherm Piko H2O Usermanual and installation guide - French - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info