744254
6
Zoom out
Zoom in
Previous page
1/53
Next page
GB 6
Attention! The transport and alignment aids may only be used on a stable
subfloor. Soft, delicate floors can be damaged by the high surface pressure
of the transport casters!
2.3 INSTALLATION/ASSEMBLY
Your stove must be installed on floors with sufficient load-bearing capacity.
Please observe the overall weight („9. Technical data“ on page 46)! The
load-bearing capacity may have to be ensured by a sufficiently thick board
(weight distribution).
Observe the necessary measures for fire protection in the floor area when
choosing the installation location. („2.3.3 Fire safety“ on page 14)
Stability "9. Technical data“ on page 6
Stoves with an upright design and fitted heat storage stones must be
secured against unintentional tilting because of their top-heaviness.
The stove is placed on the floor in compliance with the safety distances
(„2.3.3 Fire safety“ on page 14) and aligned horizontally. The feet are
adjustable in height.
Flue pipe elbow kit
Install the stove with the flue pipe bend set that we offer and refer to the
following for the stove-specific connection height dimensions.
Flue pipe elbow kit, colour version
Order no. Unpainted Black Graphite Terra Pearl
-1017770 1017769 1017772 1017771
would be hazardous in the event of ignition or explosion
Room air independent stoves can be placed in rooms, apartments or uti-
lization units of comparable size from which air can be sucked out using
fans such as ventilation or hot air heating systems. The condition is that the
vacuum-capable equipment cannot create a vacuum > 8 PA.
2.1.2 MULTIPLE CONFIGURATION
Multiple use of the chimney in accordance with DIN 18160 is possible
because the stove has a self-closing fire door (A1). All fireplaces connected
to a chimney must also be approved for multiple use!
The following applies to room-air-independent stoves:
A multiple chimney configuration is prohibited!
2.2 TRANSPORT AND ALIGNMENT AID
The Spartherm stoves Moro and Noto with integrated transport and align-
ment aid give you the possibility to move the stove to the installation loca-
tion with little effort and be able to perform the alignment quickly.
To do this, it is necessary to fully screw in the adjustable feet set into the
lower wood compartment to align the stove.
After screwing in the feet, the entire weight load of the stove is supported
by the transport casters set into the base. Now it is possible to move the
stove back and forth.
Please ensure that the fitted natural stone elements do not move or fall off
the stove! After positioning, unscrew the adjusting feet and ensure the stove
is standing securely.
Moro Noto
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Piko H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Piko H2O in the language / languages: English as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Piko H2O

Spartherm Piko H2O Usermanual and installation guide - German - 52 pages

Spartherm Piko H2O Usermanual and installation guide - Dutch - 53 pages

Spartherm Piko H2O User Manual - Dutch - 44 pages

Spartherm Piko H2O Usermanual and installation guide - French - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info