810449

Spartherm Nova E H2O Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
GB
GB 5
1.2 TECHNICAL DATA
Nova E H2O
Max. admissible operating pressure 3,0 bar
Max. operating temperature1105 °C
Minimum return temperature 60 °C
Water-side resistance
at ~ 900 l/h
at ~ 1,000 l/h
at ~ 1,100 l/h
approx. 20
approx. 30
approx. 40
mbar
Minimum throughput - heating water* 700 l/h
Minimum throughput - thermal discharge safety device 900 l/h
Water content, approx. 42 Ltr.
Weight (empty, without accessories) 260 kg
Nominal power with heat recovery section 14,0 kW
Water-side power * 9,0 kW
Average flue gas temperature outflow top * 193 °C
Average flue gas temperature at side and rear ducts* 400 °C
Average flue gas temperature at the duct of the heat recovery section 166 °C
Necessary min. delivery pressure** 12 Pa
Mass flow of flue gas 12,7 g/s
Fill quantity (after test) 4,6 kg / 70 min.
Possible feed quantity 10 kg / 70 min.
Triplet values for 10 kg/70 min: 14 Pa
Average flue gas temperature outflow top * 230 °C
Average flue gas temperature on side and rear ducts* 520 °C
Average flue gas temperature on side and rear ducts* 25 g/s
Average flue gas temperature at the duct of the heat recovery section 280 °C
Between the triplet values after test (4.6 kg) and the max. fill quantity of 10 kg, interpolation is possible.
The draught length must be determined by the stove fitter based on the conditions, materials and
design. An estimate can be made using 50-80 K/m draught length. This means that 520°C - 200°C =
320 K / 60 K = 5 m
1
The thermal discharge safety device integrated in the heating system will
open the cold water inlet at a boiler temperature of approx. 95°C!
* The specified values represent the mean value over a combustion. These
values occur under test conditions, if in 70 min a quantity of approx. 4.6
kg of dry pieces of beech wood is burned with heat recovery section (see
Fig. 1d) (see point 4.).
If the heating insert is not combined with a heat recovery section or com-
parable component as in Fig. 1d, different capacities and capacity distribu-
tions occur.
** Increased delivery pressures must be reduced to less than 25 Pa through
suitable measures, such as a draught regulator or a damper.
Necessary minimum insulation thicknesses (Isorath 1000)
Attachment wall (side / rear) mm 80
Ceiling mm 80
Setup floor mm 0
Cladding in the case of a wall that must be protected mm 60
Necessary minimum distances to heating chamber / components
Convection chamber (side / rear) mm 60
To the setup floor mm 90
Heat recovery section to the wall of the heating chamber mm 100
Connecting line to the heating chamber ceiling mm 120
Minimum distances in the radiation areas of the view pane
Flammable parts mm 1000
Flammable parts behind a radiation protection element mm 400
Area of the non-flammable floor covering to the front mm 500
Area of the non-flammable floor covering to the side mm 300
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Nova E H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Nova E H2O in the language / languages: English as an attachment in your email.

The manual is 3.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Nova E H2O

Spartherm Nova E H2O User Manual - German - 28 pages

Spartherm Nova E H2O User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info