810451
19
Zoom out
Zoom in
Previous page
1/44
Next page
GB
GB 19
EN 1856: Connecting flue pipes for heat generating systems
DIN EN 13229 Inset appliances including open fires fired by solid
fuels
DIN EN 50165 Electrical equipment of non-electric appliances for
household and similar purposes - Safety requirements
DIN EN 13384 Chimneys - Thermal and fluid dynamic calculation
methods
DIN 18160-1/2 Chimneys / house chimneys
DIN EN 12828 /
DIN 4751 Heating systems in buildings, planning of hot water
systems LBO in accordance with State Building
Regulations VDI 2035 Water treatment for heating
systems
This listing of directives makes no claim to be complete!
Fireplaces may only be installed in rooms and places where the location,
construction situation and type of utilisation do not lead to hazards. The
floor area of the installation must be of a design and size such that the
fireplace can be operated properly and as intended.
2.2 ELECTRICAL CONNECTION
The entire electrical installation of the individual components of the heating
system must only be executed by an authorised specialised company. In this
regard, all tasks must be executed in accordance with the VDE regulations
(e.g. VDE 0105, VDE 0116, VDE 0100, etc.), and in accordance with the
technical connection conditions specified by the local electricity supplier.
2.3 CONNECTIONS OF THE H2O FIREPLACE INSERTS
The connections of the safety heat exchanger, of the return flow and of the
rear ventilation possibility are on the rear or side and can always be reached
through an inspection opening over the combustion chamber. The connections
of the flow, the front ventilation possibility, as well as the immersion sleeves
for the temperature sensors are all located on the side on the flue gas man-
ifold. For accessibility, an opening in the fireplace cladding must be provided
here! For transport purposes the connections are provided with transport safe-
guards. These must be removed for installation. The connections are clearly
labelled and must not be used other than for the specified purpose! Likewise,
the integrated safety device (safety heat exchanger) must not be used to heat
water. For the pipe connections we recommend the use of straight or angled
threaded radiator fittings.
Mini Z1/Z1h H2O/XL and Mini Z1 H2O/XL RLU
Fig. 2a
5
6
4
8
7
1180
35
111
2
1
4
3
476
250
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Mini H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Mini H2O in the language / languages: English as an attachment in your email.

The manual is 4.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Mini H2O

Spartherm Mini H2O User Manual - German - 44 pages

Spartherm Mini H2O User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info