695789
30
Zoom out
Zoom in
Previous page
1/36
Next page
GB 30
4.4.3 TAKING OUT OF OPERATION SAFELY
If you wish to take the burner out of operation at an earlier stage than
normal, place the cover on the burner with the aid of the 'cold hand'.
Insert the 'cold hand' to grip the cover plate and then cover this over the
burner channel.
5. CLEANING AND CARE
The ebios-fire Quadra Inside must only be cleaned when cold.
5.1 CLEANING CLADDING PARTS
Wait until the device has cooled down before cleaning (at least 1 hour)!
Decorative metal surfaces and the cladding parts can be cleaned with a
moist cloth (do not use a microfibre cloth!).
Glass surfaces can be cleaned with a standard glass cleaner and a soft
cloth (do not use a microfibre cloth!).
Stainless steel surfaces can be cleaned with a standard stainless steel
cleaner. Only use in the direction of the finish!
Remove any dust on and below the ebios-fire furniture regularly as dust
particles can burn or char. This can cause dirt in the room and on the
furnishings where the fire is installed.
6. MAINTENANCE/TROUBLESHOOTING
The wick and burner fleece must be visually inspected at regular inter-
vals. The material can be easily damaged. As such, the burner fleece
should not be folded, bent or similar. It is not permitted to change the
burner fleece or wick.
The burner fleeces must be replaced after about 800 operating hours
(the equivalent to fuel throughput of approx. 400 L of bio-ethanol).
Please contact your specialist dealer.
Only use our original spare parts.
The tank seal must be examined occasionally for cracks or brittleness
and should be replaced if necessary.
Please contact your specialist dealer should you have any questions.
6.1 FURNITURE AND GLASS BECOMES SOOTED
HEAVILY, RAPIDLY AND UNEVENLY.
If this did not occur from the very start, please check the following points:
Has the correct fuel been used?
Cladding/cover correctly positioned?
6.2 FIRE IS DIFFICULT TO IGNITE
If this did not occur from the very start, please check the following points:
Is there fuel in the burner?
Have you wetted the ignition mats?
Has the correct fuel been used?
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Ebios Fire - Quadra Inside I SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Ebios Fire - Quadra Inside I SL in the language / languages: English as an attachment in your email.

The manual is 4.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Ebios Fire - Quadra Inside I SL

Spartherm Ebios Fire - Quadra Inside I SL Usermanual and installation guide - German - 36 pages

Spartherm Ebios Fire - Quadra Inside I SL Usermanual and installation guide - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info