779126
21
Zoom out
Zoom in
Previous page
1/254
Next page
English – 2
Technical data
On-board computer Kiox
Product code BUI330
Max. charging current of USB
portA) mA 1000
USB port charging voltage V 5
USB charging cableB) 1 270 016 360
Operating temperature °C −5to +40
Charging temperature °C 0to +40
Storage temperature °C +10to +40
Internal lithium-ion battery V
mAh 3.7
230
Protection ratingC) IPx7
Weight, approx. g 60
Bluetooth®Low Energy
– Frequency MHz 2400–2480
– Transmission power mW <10
A) At an ambient temperature of <25 °C
B) Not included as part of standard delivery
C) When the USB cover is closed
Declaration of Conformity
Robert Bosch GmbH, Bosch eBike Systems, hereby declares
that the Kiox radio communication unit complies with Dir-
ective 2014/53/EU. The full text of the EU Declaration of
Conformity can be accessed at the following Internet ad-
dress: https://www.ebike-connect.com/conformity
Fitting
Fitting and removing the on-board computer
(see figureA)
Fit the lower part of the Kiox into the holder(5) first and tilt
it forward gently until you can feel that the on-board com-
puter is firmly fixed in the magnetic holder.
To remove the on-board computer, hold it by the top end
and pull it towards you until it disengages from the magnetic
holder.
uRemove the on-board computer when you park the
eBike.
The on-board computer can be secured in place to prevent it
from being removed from the holder. To do this, loosen the
headset screw(16) until the Kiox holder can be swivelled
sideways. Put the on-board computer in the holder. Screw
the locking screw (M3 thread, 6mm long) from below into
the thread provided in the on-board computer (using a
longer screw may damage the on-board computer). Swivel
the holder back into place and tighten the headset screw in
accordance with the manufacturer's specifications.
Operation
Before initial commissioning
The Kiox is supplied with a partially charged battery. Before
using it for the first time, this battery must be charged for at
least one hour via the USB port (see "Power supply of the on-
board computer", pageEnglish – 3) or via the eBike sys-
tem.
The control unit should be attached such that the buttons
are almost perpendicular to the handlebars.
When using the on-board computer for the first time, the lan-
guage selection page is displayed initially. You can then
choose to have essential functions and indications explained
via the <Intro to Kiox> menu item. The menu item can also
be called up at a later time via <Settings> <Informa-
tion>.
Selecting system settings
Fit the on-board computer in the holder and proceed as fol-
lows with the bicycle stationary:
Go to the status page (use the <button(10) on the control
unit to get to the first display) and call up the <Settings>
with the select button.
You can use the (11) and +(12) buttons to select the set-
ting you want. You can open the settings, as well as any addi-
tional submenus, using the select button(9). You can use
the <button(10) to go back to the previous menu from any
settings menu.
The following settings can be changed in the <Sys set-
tings>:
<Brightness>
<Time>
<Date [DD.Mon.YYYY]>
<Time zone>
<24h form (24h time format)>
<Brgh backg. (Bright background)>
<Imp. units (Imperial units)>
<Language>
<Factory reset>
Starting up the eBike system
Requirements
The eBike system can only be activated when the following
requirements are met:
A sufficiently charged eBike battery is inserted (see oper-
ating instructions for the battery).
The on-board computer is properly fitted to the holder.
Switching the eBike system on/off
The following options are available for switching on the
eBike system:
Once the on-board computer and the eBike battery are
fitted, briefly press the on/off button(4) on the on-board
computer.
1 270 020 XBK | (17.03.2020) Bosch eBike Systems
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sparta D-burst METb Smart Speedpedelec - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sparta D-burst METb Smart Speedpedelec - 2021 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 15.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info