673313
7
Zoom out
Zoom in
Previous page
1/11
Next page
6
Press the CLK.ADJ/PROG. button and then the CD PLAY/PAUSE button to begin
programmed playback again.
y To clear the program from the memory after the disc stops, press the CLK.ADJ/PROG.
button and then press the STOP button.
Opening the CD door, pressing the ALARM OFF/POWER button to shut the unit off, or by
switching to the RADIO function also clear the program.
Adjusting The Wake-Up Times
This clock radio has two separate wake-up alarms that can be set and used independently. To
set or adjust the wake-up times please proceed as follows:
1. Depress and hold the ALARM SET/DISPLAY button for at least two seconds until just the
Hour digits and the AL1(Alarm 1) indicator are flashing.
2. While the Alarm 1 Hour digits are flashing press the TIME-DN/F.REW or TMIE-UP/F.FWD
buttons repeatedly to set the display to the correct wake-up hour. Example: 7:00 AM
3. When the correct wake-up hour is flashing press the CLK. ADJ/PROG. button again. The
Hour digits stop flashing and the minute digits begin to flash.
4. While the Minute digits are flashing press the TIME-DN/F.REW or TMIE-UP/F.FWD buttons
repeatedly to set the display to the correct wake-up minute.
5. When the desired Alarm 1 wake-up time is showing on the display, press the CLK.
ADJ/PROG. button to store the Alarm 1 wake-up time in the timer memory.
The AL2 (Alarm 2) indicator and the Alarm 2 Hour digits begin flashing.
Note: If you do not need to adjust the Alarm 2 wake up time you may just wait 10 seconds.
After 10 seconds the Alarm 2 display stops flashing and the clock returns to the correct time.
6. While the Alarm 2 Hour digits are flashing press the TIME-DN/F.REW or TMIE-UP/F.FWD
buttons repeatedly to set the display to the correct wake-up hour. Example: 9:00 AM
7. When the correct wake-up hour is flashing press the CLK. ADJ/PROG. button again. The
Hour digits stop flashing and the minute digits begin to flash.
8. While the Minute digits are flashing press the TIME-DN/F.REW or TMIE-UP/F.FWD buttons
repeatedly to set the display to the correct wake-up minute.
9. When the desired Alarm 2 wake-up time is showing on the display, press the CLK.
ADJ/PROG. button to store the Alarm 2 wake-up time in the timer memory. The display stops
flashing and returns to the correct time. The Alarm 2 indicator disappears.
IMPORTANT: After you press the CLK. ADJ/PROG. button you must make your wake-up time
adjustments within 10 seconds while the wake-up time display is flashing. After 10 seconds the
wake-up time display stops flashing, the display returns to the correct time, and no wake-up
time adjustments can be made. If this occurs you must begin with Step 1 above and start the
wakeup time adjustment process again.
Setting The Alarms / Selecting The Wake-up Mode
After you have adjusted the wake-up times on one or both alarms you must press the respective
ALARM 1 and/or ALARM 2 buttons one, two or three times, to activate the alarms and select
the wake-up mode.
The color of the AL1 and AL2 indicators will change according to the wake-up mode that you
select - Buzzer, Radio, or CD.
NOTE: Whichever wake-up mode you select - Buzzer, Radio, or CD – will apply to both alarms.
Press the ALARM 1 or ALARM 2 button once.
The AL indicator is Red. This indicates the Wake To Buzzer mode is selected and the alarm
is ‘On’.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster URD-750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster URD-750 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info