674319
9
Zoom out
Zoom in
Previous page
1/46
Next page
UR8600 / English Instruction Manual
2
Backup system
The radio is equipped with a backup system. It requires a 3 V lithium battery (type: CR2032).
Insert the battery into the battery compartment and make sure the positive and negative (+
or -) sides of the battery are in contact with the corresponding terminals in the battery
compartment (18).
If a power cut occurs, the radio automatically switches to the battery power supply and
keeps the clock and timer settings.
To open the battery compartment, use a screwdriver to detach the screw on the
compartment door.
When replacing the battery, do not disconnect the power adapter. Otherwise, all clock and
alarm settings will be lost.
Setting the clock
In standby mode, press and hold the CLOCK button (5) until the year starts to flash.
Setting year: Press the ◄◄ or ►► button (4 or 3).
Press the “CLOCK” button (5) to enter the date setting.
Setting month/day: Press the ◄◄ button (4) to set the month and the ►► button (3) to set
the day.
Press the “CLOCK” button (5) to enter the time setting.
Setting the time: Press the ◄◄ button (4) button to set the hour time and ►► button (3) to
set the minute time.
Press the SET button (5) to confirm each setting option.
Using the antenna
Unroll and extend the antenna (19) to improve FM signal reception.
Listening to radio
1. Press the “POWER” button (8) to switch the radio on.
2. Press the ◄◄ or ►► button (4 or 3) to adjust frequency.
3. Press and hold the ◄◄ or ►► button (4 or 3) to automatically tune to the next available FM
station.
4. Press the POWER button (8) to switch the radio off.
Controlling the sound volume
While listening to the radio, press the VOL UP” (7) or “VOL DOWN (6) button to control the
volume.
Setting preset stations
You can store up to 10 preset stations.
1. Tune to a station.
2. Press and hold the MEM/M+ button (5) until “P01” (or the next available preset slot) shows
on the display.
3. Press the ◄◄ or ►► button (4 or 3) to select a preset number (P01-P10).
4. Press the SET button (5) to confirm. The preset station has been set up.
5. Press the MEM/M+ button repeatedly while listening to the radio to select a preset station.
Alternatively, press the MEM/M+ button (5) once and then press the ◄◄ button (4) or ►►
button (3) to select a preset station.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR8600 in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 5,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info