674155

Soundmaster UR8200 Manual

20
Zoom out
Zoom in
Previous page
1/84
Next page
UR8200 / English Instruction Manual
6
Using the FM menu
1. In FM mode, press and hold the „MENU“ button (9) to access the FM menus.
2. Press the ◄◄ or ►► button (10 or 11) to cycle through the below options.
SCAN
SYSTEM
See below for details of each option.
Scan
1. Press the „SELECT“ button (6) to confirm the selection “SCAN”.
2. Press the ◄◄ or ►► button (10 or 11) to cycle through the below options.
“LOCAL”: Search for local stations with strong signals only.
“DX”: Search for all stations regardless of the signal strength.
3. Press the „SELECT“ button (6) to confirm the selected option.
System
See chapter “System menu” for details.
USING THE ALARMS
Setting alarms
The radio lets you have 2 alarm settings.
To set the alarm:
1. Switch the unit on and press the “ALARM” button (7) to select between Alarm 1 and Alarm
2 and then press the „SELECT“ button (6) to confirm the selection. The selected alarm 1 or
alarm 2 icon flashes on the display.
2. Press the ◄◄ or ►► button (10 or 11) to set the hour time of the alarm and then press
the „SELECT“ button (6).
3. Press the ◄◄ or ►► button (10 or 11) to set the minute time of the alarm and then press
the „SELECT“ button (6).
4. Press the ◄◄ or ►► button (10 or 11) to cycle through the duration options and then
press the „SELECT“ button (6) to confirm the selection.
The duration defines the time before the radio returns to standby mode if the alarm is not
deactivated. Duration options: 15, 30, 45, 60, 90 and 120 minutes.
5. Press the ◄◄ or ►► button (10 or 11) to cycle through the source options and then
press the „SELECT“ button (6) to confirm the selection.
The source defines the sound source of the alarm. Source options: DAB, FM and Buzzer.
If DAB or FM is selected, you will also be prompted to select the last played station or one
of the preset stations (if set) as the alarm.
6. Press the ◄◄ or ►► button (10 or 11) to cycle through the interval options and then
press the „SELECT“ button (6) to confirm the selection.
The interval defines on which days the alarm is active.
Interval options: Daily, Once, Weekends and Weekdays.
If “Once” is selected, you will also be prompted to set a specific date.
7. Press the ◄◄ or ►► button (10 or 11) to adjust the volume level and then press the
„SELECT“ button (6). This setting defines the sound volume of the alarm.
8. Press the ◄◄ or ►► button (10 or 11) to select alarm on or off and then press the
„SELECT“ button (6) to confirm the selection.
When the alarm setting is active, the corresponding alarm 1 or alarm 2 icon will show on the
display.
At the set time, the alarm will sound. The volume will increase gradually until it reaches the
set volume level. The corresponding alarm icon will also flash on the display.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR8200 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info