733881
10
Zoom out
Zoom in
Previous page
1/76
Next page
UR620 / English Instruction Manual
2
BACKUP BATTERY INSTALLATION
Open the battery door (21) by pushing in on the tabs, then removing the door.
Insert two (2) ‘AAA’ batteries following the correct polarity indicated in the battery compartment.
Replace the battery door (21) back on the compartment.
NOTES: The batteries are used to back-up the clock and alarm times when the AC adaptor is
disconnected or there is a power failure.
Alkaline batteries are recommended for the longest backup time.
When replacing the battery, do not disconnect the AC power adapter otherwise the current time,
alarm, and station presets will be erased.
When to replace the battery: The red LED of battery indicator will light up when there are no
batteries or when the batteries are low.
CHANGING THE INPUT SOURCE
With the UR620 powered “ON”, repeatedly press the “SOURCE button to change the input
source to cycle between FM Radio, Bluetooth or AUX IN.
PLAYING THE RADIO
With the clock radio plugged in and powered ‘ON’, press the “SOURCE button, then select
FM and the frequency indicator will appear on the display.
Repeatedly press the TUNE UP / MIN or TUNE DOWN / HOUR button to manually adjust the
tuning on the display until the desired station appears.
For auto tuning, press and hold the TUNE UP / MIN or TUNE DOWN / HOUR button until the
display starts to scan then release the button and the tuner will search and stop on the next
strong station. Repeat this process until the desired station appears on the display.
NOTE: Fully extend the FM wire antenna to increase reception sensitivity. Keep digital music
players or mobile phones away from the FM antenna as this may cause interference. Do not
place the FM antenna near the AC power adaptor as this may lead to reception interference.
SETTING RADIO PRESETS
To store a radio station to memory, first follow the steps above to tune in the desired station.
Press and hold the PLAY/RADIO PRESET button to create a preset for the current station.
“P” will appear and “##” (the preset number) will blink on the display.
Press the TUNE UP / MIN or TUNE DOWN / HOUR button to select a preset number (01- 10).
Press the “PLAY/RADIO PRESET” button again to confirm the setting and the station will be
saved into memory. Repeat these steps for up to 10 presets, as desired.
To recall a preset station, repeatedly press the PLAY/RADIO PRESET button until the desired
preset number appears in the display and the station tunes in.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR620 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info