733780
11
Zoom out
Zoom in
Previous page
1/75
Next page
UR2090 / English Instruction Manual
3
CLOCK
Setting the clock
1. When the unit is in Standby press and hold the CLK SET/MEM button. The hour on the
display will begin flashing.
2. Press the SKIP/TUNE / buttons to adjust the hour.
3. Press the CLK SET/MEM button again to adjust the minutes. The minutes on the display
will begin flashing.
4. Press the SKIP/TUNE / buttons to adjust the minutes.
5. Press the CLK SET/MEM button to finish setting the time or wait for the display to stop.
TIMER
Setting the Timer
1. Press the TIMER button. At the display the TIMER indicator will flash.
2. Press the TIMER button to adjust the timer in increments of 10 minutes.
3. Press the SKIP/TUNE / buttons to adjust the timer in increments of 1 minutes.
4. Wait until the display stop flashing
5. After the set time has expiered the device will sound an alarm.
Disabling the timer
To cancel the alarm after it has sounded press the POWER button or the TIMER button.
To cancel the timer before the alarm has sounded press the TIMER button until the display
shows 000 and the timer light is no longer lit.
CD OPERATION
1. Turn the device on and press the SOURCE button to switch to CD mode.
2. Press the OPEN/CLOSE button to open the CD tray.
3. Place a CD into the tray with the label side facing up.
4. Press the OPEN/CLOSE button again to close the CD tray. The CD will starts playing
automatically.
5. Press the PLAY/PAUSE button to interrupt the playback. Press the button again to
resume playing.
6. Press the SKIP/TUNE / buttons to select a track.
7. Press the M+/10+ or M-/10- buttons to skip down or up by 10 tracks.
8. Press the STOP button to stop the play mode.
Programming a CD
1. Press the STOP button to stop the CD during play.
2. Press the CLK SET/MEM button.
3. “Prog” will begin to blink on the display.
4. Press the SKIP/TUNE / buttons to select a track.
5. Press the CLK SET/MEM button to save the selected track to the program.
6. Repeat step 4 and 5 to program up to 20 tracks.
7. If you are ready press the PLAY/PAUSE button to start playing the programed titles.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR2090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR2090 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info