733779
12
Zoom out
Zoom in
Previous page
1/87
Next page
UR2045 / English Instruction Manual
3
FM
1. Turn the unit on and press the “ / Mode” button repeatedly until “FM” and the last FM
frequency is shown in the display.
2. Press and hold the “ “ or “ ” button to start automatically tune down or up. The unit stop
automatically to the next receivable radio station.
3. Press the “ or “ ” button to tune manually down or up in 0,05MHz steps.
If you have a bad reception you can change from STEREO to MONO to improve the sound
quality. Press and hold therefore in FM mode the “Menu” button, “Audio” is shown in the
display and press the “Enter” button to confirm. Select with “ “ or “ the stereo or mono
mode and press “Enteragain to confirm.
Store a preset station / Recall a preset station
Is the same as in DAB mode.
Use AMS (Automatic memory station) mode
Press and hold the “AMS” button, the unit will start the automatic scan and store all receivable
stations.
Note: When the AMS function is activated, all stored AMS stations will replaced by the new
radio stations!
Recall AMS Stored stations
1. Press and hold the “MEM” button and select with the “ or “ ” button the desired station
number.
2. Press the “Enter” button to confirm the selection.
FM Information
During FM mode press the “Info” button repeatedly to show the following information:
Frequency Time Date Genre Signal level.
BLUETOOTH
®
1. Turn the unit on and press the “ / Mode” button repeatedly until “BT” is shown in the
display.
2. The Bluetooth icon is flashing on top of the left corner and the unit is waiting for the
Bluetooth source. When the Bluetooth device is connected with the unit, the icon will stop
flashing and is shown in the display.
3. Press the “ or “ button to play the previous or next track. Press the “ / ” button to
play or interrupt the playback.
4. When a phone call is coming in, press the / ” button to pick up the call. Press and hold
the button again to hand-up.
KITCHEN TIMER
The unit has a kitchen timer with max. 24 hours which can be adjusted in minutes. The default
timer is set to 10 minutes.
Setup for easy activation for max. 1 hour.
1. To activate the timer, press the “Timer/Sleep” button once. The display show the default
time 10 minutes.
2. Press the “ ” button to increase each step by 10 minutes.
3. Press the “ ” button to decrease each step by 1 minute.
4. Press the “Timer/Sleep” button again to start the timer.
5. To stop the timer, press and hold the “Timer/Sleep” button when the timer is running.
12


Need help? Post your question in this forum.

Forumrules
1

Forum

soundmaster-ur2045

Reset search

  • My three year old sound master UR2045 has developed distorted sound. When turned on it works for a while and then distorts. Any ideas? Very disappointed as it is not very old. Submitted on 14-7-2022 at 10:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR2045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR2045 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info