TO SET/RECALL RADIO STATION PRESETS
1. Press the unit button (2) and (3) select the desired radio station.
2. Press and hold the unit button (5) the next available preset memory number
will flash on the LED display. (Note: “P01” will flash in the display if you are
programming presets for the first time.)
3. Press the unit button (2) and (3) to change to the desired preset number P01
thru P10.
4. Repeat steps 1 through 3 to preset up to10 FM stations.
5. To recall one of the preset stations already programmed, Press the unit
button (5) repeatedly until you reach the desired preset number/radio station.
SETTING THE ALARMS (AL1 and AL2)
You can select either a Beeper Alarm or the FM Radio as the alarm source. The
setting sequence for ALarm is as follows:
SETTING THE ALARM 1 (BEEPER)
Normal Time→ AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 beeper
→ Normal Time.
SETTING THE ALARM 1 (RADIO)
Normal Time → AL 1 Hour → AL 1 Minute → AL 1 weekday → AL 1 beeper
→ AL 1 radio → AL 1 final radio volume → Normal Time.
SETTING THE ALARM 2 (BEEPER)
Normal Time→ AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 beeper
→ Normal Time.
