674248
13
Zoom out
Zoom in
Previous page
1/39
Next page
UK-4
4. Repeatedly press the or buttons followed by pressing the SELECT button to adjust and confirm
the wake-up mode settings - first set the DAB and FM Preset (1-10), then the Buzzer Tone (1 or 2),
finally the alarm Volume level (1-20). (F.10)
5. After the selection of the alarm volume level, the wake-up mode settings are completed and the
alarm function is now ready for you to activate.
6. Repeat the above procedures to set the other Alarm (1 or 2).
F9
F10
Activating
the alarm
function
1. To activate the alarm function, repeatedly press the ALARM button (1 or 2), the associated alarm
wake-up mode will be displayed and changed in the below sequence on every press:
Alarm Off DAB Preset # FM Preset # Buzzer Tone #
2. When the display shows your desired alarm wake-up mode, release the button, the alarm function is
now activated and the associated alarm icon will be displayed.
3. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon in the display
will flash to indicate the alarm is triggered. To stop the alarm sooner, press the STANDBY/ON button.
4. To check the alarm status, press the ALARM button (1 or 2) once and the associated alarm status
will be displayed.
Note:
If you have activated the alarm function and the wake-up mode is DAB or FM, make sure that the
alarm volume level is set at a sufficient level for you to hear.
Automatic
Alarm
Repeat
The alarm will automatically repeat each day at the selected time as long as the alarm icon is displayed.
To cancel this function, repeatedly press the ALARM button (1 or 2) button until the display shows Alarm
off.
SNOOZE
FUNCTION
When the alarm has triggered, press the SNOOZE button will temporary switch off the alarm for 5
minutes, the display will show Zz “to indicate snooze on. This is repeatable in the one hour alarm
duration.
Note:
The alarm comes first will have the priority and it would continue for a one hour duration, the
snooze will just switch off this alarm temporary during this duration, so if the second alarm comes in this
period, it will not function. But if the first alarm is switched off before the second alarm arrives, then the
second alarm will be activated.
SLEEP
FUNCTION
This function allows you to program the radio to switch off itself after a set period of time.
1. To activate the sleep function, repeatedly press the SLEEP button, the display will show Sleep
Timer and the time will change in the below sequence on every press:
90
80
70
60
30
20
10
Off
2. When your desired sleep time appears in the display, release the button and the sleep function will
be activated in two seconds. The display will show # where 1 is to represent “10 minutes
sleep time and so on.
3. When the sleep time counts to zero, the unit will go off. To put the sleep function off during sleep
timer on, repeatedly press the SLEEP button until the display shows Sleep Timer off.
4. To check the sleep timer status, repeatedly press the INFO button until you see the sleep timer
information appears in the display.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR170WE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR170WE in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info