674248
10
Zoom out
Zoom in
Previous page
1/39
Next page
UK-1
FEATURES
AND
CONTROLS
FEATURES AND CONTROLS
1. SPEAKER
1
2.
/
BUTTON
3. MEMORY BUTTON
4. SELECT BUTTON
5. STANDBY/ON BUTTON
6.
7.
MODE BUTTON
BACKLIGHT BUTTON
8. SNOOZE BUTTON
9. INFO BUTTON
2
3
4
5 6 7 8 9 10 11 12
17
18
15
14
13
16
10. MENU BUTTON
11. SLEEP BUTTON
12. MUTE BUTTON
13. ALARM 1 BUTTON
14. ALARM 2 BUTTON
15. VOLUME BUTTON
16. LCD DISPLAY
17. AC CORD
18. HEADPHONE JACK
19
.
WIRE ANTENNA
LISTENING
TO
YOUR
RADIO
Hints for better
reception
This radio carries a single DAB/FM lead wire antenna, to obtain the best performance, you should fully
extend the wire antenna and adjust the position as well as the direction until you find the best reception.
For ideal DAB reception, always maintain the lead wire antenna in a vertical position (holding it upward or
downward behind the unit) is highly recommended.
Getting
started
When the radio is connected to the DC power jack of AC/DC adapter for the first time, it will be in standby
mode. The display backlight will be on for a few seconds and the clock will be finally displayed. Press
the STANDBY/ON button once to turn the radio on, it will then automatically enter into the DAB mode and
perform auto scan function. During the scan the display will show Scanning together with a slide bar
that indicates the progress of the scan and the amount of stations that have been found so far. (F. 1) (F. 2)
Once the scan has finished, the radio will select the first alphanumerically found station. You can now
press the or button to explore the found stations and then press the SELECT button to select your
station.
F1
F2
Note: If there is no stations found after auto scan, the radio will then enter into the Tune Select Menu, you
can now press the / buttons followed by pressing the SELECT button to select Manual tune or
Autoscan for stations.
Clock
setting
The clock will only set and be updated if you can receive DAB signals in your location. In order for the
clock to synchronise to the current local time, you must leave it one DAB station for a short period. Manual
clock setting is not required.
DAB auto
scan
The auto scan will search for the entire DAB Band III channels. After the scan has finished, the first
alphanumerically found station will be automatically selected.
1. To activate auto scan, first press the MENU button to enter into the Tune Select Menu and then press
the or button to select Autoscan, finally press the SELECT button to confirm, the display will
show Scanning and a progressing slide bar.(F. 3)
2. All the stations that have been found will be stored automatically, to explore the stations that have
been found, press the or buttons and when you find a station that you would like to listen to,
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR170WE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR170WE in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info