GB - 3
PREPARATION FOR USE
INSTALLING THE UNIT UNDER A CABINET
1. Mark the position of the 3 holes by using the supplied template. Use a drill to make the
holes.
2. Whenthecabinetdooroverhangstheshelfandobstructstheunit,youcanadjustthe
unit/shelf height.
3. Install the unit with the supplied mounting screws.
Caution:
Please read the following before installing the unit.
• Since the unit is heavy, be careful when installing the unit.
• Toreducetheriskofre,donotplaceanyheatingorcookingappliancebeneaththis
unit.
• Install the unit so that its AC power cord can be connected directly to a wall outlet. Do
not use a converter or extension cord.
• Be sure that the AC power cord has no slack when using the unit. If the AC power cord
has some slack, wind it up to the cord hook until the cord has no slack.
• The unit has a built-in ferrite bar antenna for AM radio reception. Check the condition of
AMreceptionbeforexinginposition.
• Install the unit as far as possible from a source of noise. (for example, refrigerator,
microwaveoven,uorescentlamp,etc.)
• Use tools carefully while installing of the unit.
• Toreducetherishofre or electricshock,donottouchtheACpowercordwithwet
hands.