733872
15
Zoom out
Zoom in
Previous page
1/78
Next page
SCD5800 / English Instruction Manual
6
CASSETTE
Playing Cassettes
1. Select the Tape mode with the “STANDBY / FUNCTION button, until “TAPE” is shown.
2. Press the STOP/EJECT button to open the cassette compartment.
3. Insert a recorded audiocassette into the compartment with the tape opening facing upwards
and the side you wish to listen to facing the front (full spool to the right). Then close the
cassette compartment again.
4. Press the PLAY button to listen to the tape.
5. With the STOP/EJECT button you can stop play-back.
6. Wind the tape forwards or backwards if necessary in the direction of the arrow keys.
7. Always press the STOP/EJECT key when changing the direction or stopping the tape.
This prevents damage to the machine and the tape.
8. If the STOP/EJECT button is pressed again the flap of the cassette compartment opens.
9. In order to interrupt playback briefly, press the PAUSE button. Pressing again continues
playback.
Cassette Record
1. Insert an audio cassette into the cassette compartment. Make sure the cassette write-
protect has not been removed.
2. Select the function mode you want to record from and start playback if necessary.
3. Press the "RECORD" button on the cassette section to start recording.
4. If you want to stop recording, press the "PAUSE" button on the cassette part. To resume
recording, press the button again.
5. To stop recording, press the "STOP / EJECT" button on the cassette section.
MICROPHONE
1. Plug the microphone into the "MIC" socket on the back of the device.
2. Turn on the microphone.
3. Pressing the "VOLUME-" and "VOLUME +" buttons will change the volume of the selected
source as well as the microphone volume.
4. If you press the "RECORD" button on the cassette part, the recording starts.
Note: In cassette mode, the microphone is not useable.
HEADPHONE
To listen to music privately, use headphones with a 3.5 stereo jack plug and connect to the
headphones socket on the back of the system. The speakers will then be muted.
DISCO LIGHT EFFECT
Press the "LIGHT" button to turn the disco light effect on or off.
TECHNICAL SPECIFICATION
Power supply
:
AC 230V ~ 50Hz
Battery supply
:
6x LR14, UM-2 (“C” size) 1.5 V
Frequency range FM
:
87.5 108MHz
Preset station
:
30 FM
Audio output power
:
2x 1.5W RMS
Technical changes and misprints reserved.
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.soundmaster.de
Duplication only with the permission of Woerlein GmbH
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster SCD5800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster SCD5800 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info