673306
8
Zoom out
Zoom in
Previous page
1/42
Next page
LOCATION OF CONTROLS
1
MODE/DAB+/FM/CD/USB button
11
Carry handle
2
PRESET/PROG/10+ button
12
AUX-IN jack
3
MENU/FOLDER DOWN button
13
Speaker
4
ENTER/FOLDER UP button
14
LCD display
5
PLAY/PAUSE/FULL SCAN button
15
FUNCTION switch
6
STOP/INFO button
16
VOLUME control
7
SKIP - / TUNE < button
17
Battery Compartment
8
SKIP +/ TUNE > button
18
AC socket
9
Rod antenna
19
USB Slot
10
CD Compartment
AC OPERATION
Before operation, please make sure that the VOLTAGE mentioned on the unit is same as the
voltage of your local area. Unravel the AC power cord, insert one end into the AC socket on the
set and the other end into a standard AC outlet..
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands;
2. If you plan not to use the unit for a long time, disconnect the power cable from the wall outlet;
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to
avoid shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Compartment Door and insert 8 pieces
UM-2 "C" size batteries into the battery compartment with battery polarity as shown inside the
battery compartment.
DAB RADIO OPERATION
1. Set the FUNCTION switch to RADIO position
2. Press the DAB+/FM button to select DAB mode.
3. Rotary the VOLUME control to adjust the desired listening level.
Full Scan
In DAB mode, press the FULL SCAN button to perform full scan the available DAB stations.
During the scan, the display will show Searching…” together with a slide bar that indicates the
progress of the scan and the amount of stations that have been found so far. Once the scan has
completed, to explore and listen to the found stations, press the SKIP+/TUNE> or SKIP-/TUNE<
button, then press ENTER button to confirm.
Manual Tune
You can also manually tune the receiver. This can help when aligning your aerial or when adding
stations that were missed while auto tuning.
1. In DAB mode, press and hold the ENTER button and it will show MANUAL TUNE.
2. Press the SKIP+/TUNE> or SKIP-/TUNE< button to cycle through the DAB channels, which
are numbered from 5A to 13F
3. After your desired channel number is reached, press the ENTER button to exit the manual
tune.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster SCD4200TI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster SCD4200TI in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster SCD4200TI

Soundmaster SCD4200TI User Manual - English - 5 pages

Soundmaster SCD4200TI User Manual - German - 5 pages

Soundmaster SCD4200TI User Manual - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info