562173
7
Zoom out
Zoom in
Previous page
1/11
Next page
E-6
3. PRESS THE
BUTTON (15) AND THE UNIT WILL DISPLAY & AND FLASHING.
ENCODING IS NOW PERFORMING.
4. PRESS THE
BUTTON (15) REPEATLY AGAIN TO SELECT REC_ALL “.
5. AFTER COMPLETED OF ENCODING ACCORDING TO THE PRESET PROGRAM, UNIT WILL STOP
PLAYBACK AUTOMAT ICALLY.
REMARK:-
- SAME OPERATION PROCEDURE FOR ENCODING TO SD/MMC CARD.
- IF BOTH RECRODING SOURCE (USB PEN DRIVE AND SD/MMC
CARD) BEING DETECTED BY THE
SYSTEM DURING ENCODING, PLEASE PRESS “SKIP UP
OR DOWN BUTTON (18/20) TO SELECT
THE DESIRE SOURCE. THEN PRESS
REC BUTTON (15) AGAIN TO CONTINUOUS THE PROCESS.
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK
- THE SYSTEM WILL CREAT A AUDIO FOLDER AND THEN STORE THE ENCODING TRACK IN IT.
- THE RECORDING FORMAT
IS PRESET ATMP3
BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
- NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
- TO INTERRUPT THE RECRODING, PRESS THE“
STOP BUTTON (19) DURING RECORDING MODE.
- RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMIN ATE THE
ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO
THE USB OR SD/MMC CARD
III) COPYING OF MP3/WMA FILE
IF PUTTING A MP3/WMA DISC
INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR
SD/MMC CARD IF PRESS THE
REC BUTTON (15). THE OPERATION PROCEDURES IS SAME AS CD
ENCODING AS STIPULAT E ON ABOVE, AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF
MP3/WMA FILE BEING READ.
REMARK:
- THE SYSTEM WILL STORE THE FILE TO USB SOURCE FIRST IF BOTH USB AND SD
SLOT ARE BEING
OCCUPLIED BY STORAGE MEDIA.
- THE SYSTEM WILL CREAT A FCOPY FOLDER AND THEN STORE ALL COPY FILE IN IT.
- IF PRESS THE“
REC BUTTON (15) DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY
FROM USB TO SD OR SD TO USB.
B) PHONO ENCODING
1) SELECT PHON/AUX MODE AND THEN PRESS THE REC BUTTON (15) DIRECTLY.
2) THE LCD DISPLAY (2) WITH SHOW
& AND FLASHING AFTER FEW SECONDS. NOW
THE SYSTEM IS STARTING THE ENCODING MODE.
3) START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB POSITION.
4) AFTER FINISH OF RECODING, PRESS THE
STOP BUTTON (19) UNTIL THE TEXT ON LCD DISPLAY
(2) STOP FLASHING AND RETURN TO PHON/AUX MODE.
C) RADIO ENCODING
1) SELECT TUNER MODE AND THEN SELECT THE DESIRE RADIO STATION
2) PRESS THE“
REC BUTTON (15) TO START THE ENCODING.
3) THE LCD DISPLAY (2) WITH SHOW
& AND FLASHING AFTER FEW SECONDS. NOW
THE SYSTEM IS STARTING THE RECORDING.
4) AFTER FINISH OF RECODING, PRESS THE
STOP BUTTON (19) UNTIL THE TEXT ON LCD DISPLAY
(2) STOP FLASHING AND RETURN TO TUNER MODE.
REMARK:-
- IF THE RADIO RECEPTION SIGNAL IS NOT STRONG ENOUGH, THE SYSTEM CANNOT START THE
ENCODING PROCESS AND THE TEXT NO GOOD WILL SHOW
ON THE LCD DISPLAY (2).
- THE RECRODING QUALITY AND PERFORMANCE FOR RADIO ENCODING IS NOT STABLE DUE TO
INTERFERENCE OF RADIO RECEIPTION. THIS IS NOT A MAUFUNCTION OF THE SYSTEM.
D) AUX-IN ENCODING
CONNECT ANOTHER AUDIO DEVICE, E.G. (PORTABLE) CD PLAYER, MP3 PLAYER, (PORTABLE) CASSETTE
PLAYER, IPOD, ETC. TO THIS SYSTEM VIA A CORD WITH 3.5MM DIA JACK PLUGS (NOT SUPPLIED).
CONNECT ONE END OF THIS CORD TO THE 3.5MM DIA. HEADPHONE JACK ON THE EXTERNAL DEVICE
AND
THE OTHER END TO THE 3.5MM AUX-IN JACK (5) ON THE SIDE OF THE UNIT.
WHEN CONNECTED IN THIS WAY IT IS POSSIBLE TO:
SELECT “PHONO/AUX” MODE. ONCE 3.5MM PLUG PLUGGED T THE AUX IN JACK. CHANNEL WILL CHANGE
TO AUX IN AUTOMATICALLY.
PLAY BACK THE MUSIC ALREADY ON THE CONNECTED DEVICE.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster PL875USBv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster PL875USBv2 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster PL875USBv2

Soundmaster PL875USBv2 User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info