562172
8
Zoom out
Zoom in
Previous page
1/12
Next page
E-6
3. PRESS THE “ BUTTON (15) AND THE UNIT WILL DISPLAY ” & “ AND FLASHING.
ENCODING IS NOW PERFORMING.
4. PRESS THE
“ BUTTON (15) REPEATLY AGAIN TO SELECT “ REC_ALL “.
5. AFTER COMPLETED OF ENCODING ACCORDING TO THE PRESET PROGRAM, UNIT WILL STOP
PLAYBACK AUTOMATICALLY.
REMARK:-
- SAME OPERATION PROCEDURE FOR ENCODING TO SD/MMC CARD.
- IF BOTH RECRODING SOURCE (USB PEN DRIVE AND SD/MMC CARD) BEING DETECTED BY THE
SYSTEM DURING ENCODING, PLEASE PRESS “SKIP UP
OR DOWN ” BUTTON (18/20) TO SELECT
THE DESIRE SOURCE. THEN PRESS
REC “ BUTTON (15) AGAIN TO CONTINUOUS THE PROCESS.
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK
- THE SYSTEM WILL CREAT AAUDIO “ FOLDER AND THEN STORE THE ENCODING TRACK IN IT.
- THE RECORDING FORMAT IS PRESET AT – MP3
BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
- NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
- TO INTERRUPT THE RECRODING, PRESS THE“
STOP “ BUTTON (19) DURING RECORDING MODE.
- RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMINATE THE
ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO
THE USB OR SD/MMC CARD
III) COPYING OF MP3/WMA FILE
IF PUTTING A MP3/WMA DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR
SD/MMC CARD IF PRESS THE “
REC “ BUTTON (15). THE OPERATION PROCEDURES IS SAME AS CD
ENCODING AS STIPULATE ON ABOVE, AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF
MP3/WMA FILE BEING READ.
REMARK:
- THE SYSTEM WILL STORE THE FILE TO USB SOURCE FIRST IF BOTH USB AND SD SLOT ARE BEING
OCCUPLIED BY STORAGE MEDIA.
- THE SYSTEM WILL CREAT A “ FCOPYFOLDER AND THEN STORE ALL COPY FILE IN IT.
- IF PRESS THE“
REC “ BUTTON (15) DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY
FROM USB TO SD OR SD TO USB.
B) PHONO ENCODING
1) SELECT “ PHON/AUX “ MODE AND THEN PRESS THE “ REC “ BUTTON (15) DIRECTLY.
2) THE LCD DISPLAY (2) WITH SHOW “ & “ AND FLASHING AFTER FEW SECONDS. NOW
THE SYSTEM IS STARTING THE ENCODING MODE.
3) START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB POSITION.
4) AFTER FINISH OF RECODING, PRESS THE “
STOP “ BUTTON (19) UNTIL THE TEXT ON LCD DISPLAY
(2) STOP FLASHING AND RETURN TO “ PHON/AUX “ MODE.
C) RADIO ENCODING
1) SELECT “ TUNER “ MODE AND THEN SELECT THE DESIRE RADIO STATION
2) PRESS THE“
REC “ BUTTON (15) TO START THE ENCODING.
3) THE LCD DISPLAY (2) WITH SHOW
“ & “ AND FLASHING AFTER FEW SECONDS. NOW
THE SYSTEM IS STARTING THE RECORDING.
4) AFTER FINISH OF RECODING, PRESS THE “ STOP “ BUTTON (19) UNTIL THE TEXT ON LCD DISPLAY
(2) STOP FLASHING AND RETURN TO “ TUNER “ MODE.
REMARK:-
- IF THE RADIO RECEPTION SIGNAL IS NOT STRONG ENOUGH, THE SYSTEM CANNOT START THE
ENCODING PROCESS AND THE TEXT “ NO GOOD “ WILL SHOW ON THE LCD DISPLAY (2).
- THE RECRODING QUALITY AND PERFORMANCE FOR RADIO ENCODING IS NOT STABLE DUE TO
INTERFERENCE OF RADIO RECEIPTION. THIS IS NOT A MAUFUNCTION OF THE SYSTEM.
D) AUX-IN ENCODING
CONNECT ANOTHER AUDIO DEVICE, E.G. (PORTABLE) CD PLAYER, MP3 PLAYER, (PORTABLE) CASSETTE
PLAYER, IPOD, ETC. TO THIS SYSTEM VIA A CORD WITH 3.5MM DIA JACK PLUGS (NOT SUPPLIED).
CONNECT ONE END OF THIS CORD TO THE 3.5MM DIA. HEADPHONE JACK ON THE EXTERNAL DEVICE AND
THE OTHER END TO THE 3.5MM AUX-IN JACK (5) ON THE SIDE OF THE UNIT.
WHEN CONNECTED IN THIS WAY IT IS POSSIBLE TO:
SELECT “PHONO/AUX” MODE. ONCE 3.5MM PLUG PLUGGED T THE AUX IN JACK. CHANNEL WILL CHANGE
TO AUX IN AUTOMATICALLY.
PLAY BACK THE MUSIC ALREADY ON THE CONNECTED DEVICE.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster PL870USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster PL870USB in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster PL870USB

Soundmaster PL870USB User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info