674278
15
Zoom out
Zoom in
Previous page
1/96
Next page
PL585 / English Instruction Manual
4
Preset stations
You can store up to total of 40 radio stations in the memory (20-FM/20-DAB).
1. Set to FM/DAB mode
2. Turn to the desired radio station by “manual ” or “ auto ” tuning method.
3. Press and hold the MEM/CLK-ADJ button (3) around four second to enable memory state, the preset station
will flash on LCD display.
4. Preset the Skip/ Pre up/down button (1) to select the desired station memory for storage.
5. Press MEM/CLK-ADJ” button (3) to confirm the preset memory.
6. Repeat step 2 to 5 to store other stations.
Recall preset stations
1. Press the MEM/CLK-ADJ” button (3) once to enable recall state
2. Press “Skip/Tuning or button (1) to select the desired memory station.
3. Press MEM/CLK-ADJ” button (3) to confirm the recall memory station.
It is also possible to press “MEM PRE / ▼“ button on remote control, to select the desired memory station.
There are 3 seconds for program state, after 3 sec. This state would resume to normal tuner mode
automatically.
You can overwrite a present station by storing another frequency in its place.
FM-Stereo reception
Press the “ ENTER knob (2) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly.
In particular when stereo signals are weak, it is preferable to receive the program in Mono.
Hints for best reception:-
- FM/DAB : the receiver work with detachable DAB/FM wire antenna, made sure the antenna is plugged into the
antenna socket (22), totally unraveled and proper for the best reception.
PHONO OPERATIONS
Please Note - Before Use
- Remove the stylus protector.
- Be sure that the tone arm is being detached from the tone arm rest before operating
and re-secured again afterwards.
1. Turn the FUNKTION” knob (5) to select “ Phono/Aux ” mode.
2. Set the speed selector (18) to the proper position depending on the record to be played.
3. Place the record on the platter (use the spindle adaptor (17) if required).
4. Lift the tone arm from the rest with the ton arm lift (24), slowly move it to the record side.
The platter will start to rotate.
5. Place the tone arm by the ton arm lift (24) to the desired position of the record.
6. Adjust the volume Knob (13) to the desired level.
7. At the end of record, the platter will automatically stop rotating. Lift the tone arm from the
record and return it to the rest.
8. To stop manually, lift the tone arm from the record and return it to the rest.
Remark : As some kind of record the auto-stop area was out of the unit setting, so it will stop before the last track
finish. In this case, select the auto-stop switch (19) to off position, then it will run to the end of the record but will
not stop automatically (turn off the unit by ON/Standby/volume knob (13) or switch back the auto-stop switch to “ on
“ position to stop the platter rotate). Then put back the tone arm to the rest position.
AUX-IN CONNECTION
Connect the unit to any auxiliary device (i.e. MP3 player, or iPod® (not included) by connecting the aux in jack (15)
with one end of 3.5mm stereo cable(not provided) and the other end connect to the auxiliary device to perform the
music.
1. Turn the FUNCTION” knob (5) to select Phono/Aux ” mode.
2. Plugged the Aux in jack. The channel with switch to Aux automatically.
3. Start to playback your device and adjust On-off/Volume knob (13) to the desire volume level. If the distortion was
too high, reduce the volume level of your auxiliary device.
Remark : due to Aux and Phono were designed at the same position of this system. When Aux in jack (15)
plugged by 3.5mm stereo plug. The channel will change to Aux-in function automatically and turntable will
stop to rotate. Please ensure the Aux in jack (15) without plugged by anything before playing Phono.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster PL585 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster PL585 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster PL585

Soundmaster PL585 User Manual - English, German, Dutch, Danish, French, Italian, Swedish, Norwegian - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info