674125
16
Zoom out
Zoom in
Previous page
1/81
Next page
PL525 / English Instruction Manual
4
FM & FM-stereo reception
Press the Mono/St” button (9) repeatedly, the FM programs are receiving in mono and
stereo mode repeatedly. In particular when stereo signals are weak. It is preferable to
receive the program in mono.
If stereo signal is being received, the stereo indicator will appear on LCD (7) to show
FM stereo program is now receiving.
Hints for best reception:-
FM : the receiver has a build-in FM wire antenna hanging at the rear cabinet. This wire should
be totally unraveled and extended for the best reception.
LISTEN TO THE PHONO
Note:
- Remove the stylus protector.
- Be sure that the tone arm is being detached from the tone arm rest
before operating and re-secured again afterwards.
1. Turn “Function button (4) to select Phono ” mode.
2. Set the speed selector (19) to the proper position depending on the
record to be played.
3. Place the record on the platter (use the spindle adaptor (17) if required).
4. Lift the tone arm from the rest and slowly move it to the record side.
The platter will start to rotate.
5. Place the tone arm by the pick up holder (21) to the desired position of
the record.
6. Adjust the volume (12) to the desired level.
7. At the end of record, the platter will automatically stop rotating. Lift the
tone arm from the record and return it to the rest.
8. To stop manually, lift the tone arm from the record and return it to the rest.
Remark : As some kind of record the auto-stop area was out of the unit setting, so it will stop
before the last track finish. In this case, select the auto-stop switch (20) to “ off “ position, then it
will run to the end of the record but will not stop automatically (turn off the unit by power/volume
knob(16)or switch back the auto-stop switch to on position to stop the platter rotate). Then
put back the tone arm to the rest position.
AUX-IN CONNECTION
Connect the unit to any auxiliary device (i.e. MP3 player, or iPod® (not included) by connecting
the aux in jack (14) with one end of 3.5mm stereo cable(not provided)and the other end connect
to the auxiliary device to perform the music.
1. Turn Function button (4) to select Aux ” mode.
2. Plugged the Aux in jack from your external device.
3. Start to playback your device and adjust On-off/Volume knob (12) to the desire volume level.
If the distortion was too high, reduce the volume level of your auxiliary device.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster PL525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster PL525 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info