49
Auto System AV MONITOR
Step: 1. Connect Audio and Video (NTSC or PAL System) signal
sources.
2. Power on the player
3. Switch to VIDEO mode by pressing MODE or AV key
4. Set up the auto system electro circuit inside, and the PAL
or NTSC system is available
5. Adjust volume
Solutions to possible problems:
Please refer below if you come across the following questions
* NO SOUND
1. Check whether the player is well connected.
2. When using earphone for listening, check whether the VOLUME
knob of the earphone is placed in the minimum position or not, and
make sure it’s turned on, and tune the volume up if needed
3. Confirm whether the operation of TV or amplifier is normal or not.
* NO IMAGE
1. Make sure that you have turned on the player.
2. Make sure the power is well connected.
3. When low battery, charge the battery and use adapter to power
on the player.
4. Make sure the connection to the TV is correct. (When connected
with the TV)