562144

Soundmaster P1500LTP Manual

8
Zoom out
Zoom in
Previous page
1/15
Next page
14
15
General Viewing Function (Digital)
The rst channel is then automatically displayed:
Screen 4 :
Installation completed screen
Screen 5 :
Zapping mode
Program Information
At the end of the rst installation or after the validation of a service in the service selector, the
TV turns into viewing mode. This mode is also called “TV mode” according to the selected
channel.
Screen 6 : Banner details
After each channel change of after a press on the “INFO” button, a banner is displayed at the
bottom of the screen for a few seconds, including(1)service type, (2)current list, (3)channel
number in the list, (4)channel name, (5)event name, (6)current time, (7)Duration of event (8)as
well as specic icons relative to the service properties (from left to right : maturity level/extend-
ed event information/multitrack audio/scrambled program/Subtitle presence),(9)Signal strange
Information about present and following events of the current service are available.
By default, the present event is displayed. The following event is displayed by pressing the
“LEFT/RIGHT” buttons (toggle between present and following events).
You can see all DTV channels found while the channel search is in progress.
A pop-up will indicate you that the automatic installation is nished. This pop-up will disappear
automatically after a few seconds.
First-Time Installation (Digital)
Once you have correctly connected the TV, you will also need to perform a “First-time installation”.
The “ENTER” button always conrms a selection within these menus, and pressing it will take
you to the next step in the installation process. However, and this is important, more than one
value often has to be entered in a menu. Firstly, make all necessary setting changes. Then,
conrm them all simultaneously by pressing the “ENTER” Button.
You can always return to the previous menu by pressing the “EXIT” button.
Use the “UP/DOWN” buttons to move upwards and downwards from one line to another.
Use the “LEFT/RIGHT” buttons to change the settings.
You can also use the digit buttons on the remote control to enter numeric values.
The first screen displayed is a welcome screen which will be displayed only for a few
seconds,you will then see the next screen.
Screen 1 : Welcome screen Screen 2 : Country setup screen
If the country is correct then press “ENTER”button to validate the screen to launch the auto-
matic channel installation:
Screen 3 : First installation screen
P1500LTD IB(ENG) 0211-12167-20.indd 14-15 2008/1/24 下午 04:00:04
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster P1500LTP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster P1500LTP in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info